1.2µs/50µs Impulse Dielectric Withstand EVSE Testing Equipment
Complied Standards & Clauses
IEC/CDV 61851-1 "Electric vehicle conductive charging system - Part 1: General requirements" clause 12.3
IEC 60664-1 "Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests"
IEC 61180 "High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment"
Equipments Overview
This tester is specially designed to evaluate transient overvoltage resistance, as well as to verify electrical clearance and creepage distance between components.
Suitable Test Samples
Ideal for testing a wide range of electronic devices, including:
• Household Appliances
• Audio/Video Equipment
• Consumer Electronics
• Similar Low-Voltage Electronic Products
Key Feature
During a breakdown test, the unit simulates real-world failure conditions:
Visible spark and audible noise when breakdown occurs
Peak voltage drops sharply (nearly to zero) upon discharge
Repeatable behavior during subsequent tests at same voltage, indicating reliable fault detection
Technical Parameters
Model | SN1104 |
DC high voltage | Max. 12.5kV |
Impact cycles | 1 ~ 9999 |
Working power source | Rated voltage: ~ 220V±10%, 50Hz |
Peak voltage: 300 V~ 12,500V | Low: 300V~2,500V High: 2,500 V~ 12,500V |
Impulse voltage wave | Impulse wavefront time: 1.2 µs ± 30 %; Half value of after wave time: 50 µs ± 20 % (Note: the waveform can be checked by an external oscilloscope.) |
Instrument internal resistance | 12Ω± 10%, 40Ω± 10%, 500Ω± 10% three resistance built-in, can be switched by choosing different terminal |
Polarity | Positive and negative |
Impact interval time | 5 ~ 99s |
Dimension | 630mm×600mm×380mm |
Weight | 30 KG |
Details