OEM UPS battery pack
Item | Specification |
Nominal Voltage | 24V |
Nominal Capacity | 25Ah |
Charge Method | CC-CV |
Charge Temperature Range | 0~45℃ |
Discharge Temperature Range | -20~45℃ |
Customized LiFePO4 /LI-ion battery pack + charger + BMS. The BMS (Battery Management System that can monitor and equalize each single cell during charge & discharge ) .
Li-ion Battery: 3.7V/7.4V/11.1V/14.8V/22.2V/24V/36V/48V/60V/72V.....
LifePO4 Battery: 3.2V/6.4V/9.6V/12.8V/16V/25.6V/36V/48V/60V/72V...
Capacity: 1.5ah/5ah/10ah/12ah/15ah/20ah/30ah/40ah/50ah/100ah/150ah/200ah/300ah...
Notice for Designing Battery Pack
1 Pack toughness
Battery pack should have sufficient styength and the Li-Fe cell inside should be protected from mechanical shocks.
2 Cell fixing
The Li-Fe cell should be fixed to the battery pack by its large surface area.
No cell movement in the battery pack should be allowed.
3 Inside design
No sharp edge components should be insides the pack containing the Li-Fe cell.
4 Tab connection Spot welding is recommended for Li-Fe tab connection method.
Battery pack should be designed that shear force are not applied to the Li-Fe tabs.
If apply manual solder met hod to connect tab with PCM.below notice is very important to ensure battery
performance:
◆·The solder iron should be temperature controlled and ESD safe;
◆·Soldering temperature should not exceed 350℃;
◆·Soldering time should not be longer than 3s;
◆·Soldering times should not exceed 5 times,Keep battery tab cold down before next time soldrictly g;
◆·Directly heat cell body is strictly prohibited,Battery may damaged by heat above approx.100℃.
Main uses: Solar sytem, UPS, Backup power supply, Marine, RV...
1.electrical and hobby ---E-Bike
2.Emergency power supply, LED light and flashlight.
3.consumer applications
4.electrical tools
5.solar lawn, remote control
6.electric vacuum cleaner, electric sweeper
7.Backup power supply, Medical Device and so on.