Item: Rubber track undercarriage
Main Parts:Rubber track;construction frame;tensioning screw,drive wheel/sprocket; support wheels,and idler,etc.
Material:Rubber Track and Steel Construction,UHMW-PE(wheels)
Description of the rubber track undercarriage:
1. Wide used on snow blower,paver,dumper,mini excavator,small harvester,anti-fire robot,raw mower,and other small or mid size machine design.
2. Easy for vehicles to run on hill land, mud road, sand ground...
3.Max load only 100kgs,if your idea of design is over 100kgs,please contact us for choosing other models.
4.Application: All terrain/season;
5.Warranty: 6 months
The choice of operating environment and notice for rubber track undercariage are as follows:
(1) rubber track,temperature is generally between -25 ~ + 55'C.
(2) chemical, oil, sea salt will accelerate the aging track, after use in such an environment, need to clean track.
(3) sharp edge (such as steel, stone, etc.) of the road will cause damage to the rubber track.
(4) the curb of the road, rutted or uneven pavement can cause side edge of the ground track pattern to be cracked, but the rubber track can be used continuously if the inside steel cord has no injuries.
(5)gravel, gravel road will result in abrasion earlier where the idlers connect with the rubber track, and formation of small cracks. Serious water ingress, causing iron core loss, wire breakage.
(6)30 degree slope and 15 degree side slope,for climbing
All the size of rubber track undercarriage(except the track width) can be adjusted
Application: moving platform and other vehicle which will use rubber track undercarriage
rubber track undercarriage adapt to various environments such as mountain roads, snow, and seabed
Warranty:Guarantee half year under normal use for the rubber track undercarriage
MAIN SIZE:
Length | Width | Height | Drive Wheel Diameter | Track Width | Weight | Load bearing | Max Speed |
1400mm | 800mm | 400mm | 245mm | 130mm | 230kg | 100kg | 4KM/H |
Electric motor we can supply for this rubber track undercarriage:
Motor is 48V 1300W
for one whole set including 2*motor with reducer+1*controller+1*remote control
(not including battery)
Specification of the rubber track undercarriage in the ads
MODEL | 201-130 | ELECTRIC TYPE | DC BRUSHLESS MOTOR |
LENGTH | 1400MM | VOLTAGE | 48V |
WIDTH | 800MM | MOTOR POWER | 1300W |
HEIGHT | 400MM | REDUCER TYPE | WORM GEAR REDUCER |
TRACK SIZE | 130*40*73 | SPEED | 0-4KM/H |
GROUND CLEARANCE | 120MM | MOTOR WITH BREAK OR NOT | NO |
UNDERCARRIAGE WEIGHT | 230KG | REMOTE CONTROL TYPE | RC REMOTE CONTROL |
MAX LOAD CAPACITY | 100KG | REMOTE AERA | 300 METERS WITHOUT OBSTRUCTION |
BOX MATERIAL | STEEL WELDING BOX | CONTROL TYPE | PWM |
WHEEL MATERIAL | UHMW-PE | RECOMMEND BATTERY | LITHIUM BATTERY 48V80AH |
SHAFT MATERIAL | 45# STEEL | BATTERY LIFE | 120MINS |
STRUCTURE MATERIAL | STAINLESS STEEL | SPRAYING METHOD | SPRAY |
BEARING TYPE | HRB BEARING | VERTICAL OBSTACLE HEIGHT | 200MM |
CLIMBING SLOPE | 30° (SIDE SLOPE 15°) | PACKING | WOODEN CASE |