Welding Mesh Isolation Fence

Welding grid isolation grid, also called electric welding grid isolation grid, is a more commonly used isolation protection products.

The basic components include:

Welding mesh, steel pipe column, connection anti-theft screws, etc.

Product specifications:

1. The frame is generally welded with square tubes of 20*30mm, 25*25mm and 30*50mm. The thickness of square tubes is 1.0mm, 1.2mm, 1.5mm and 2.0mm, etc. Column specifications are more square tube and circular tube, the diameter of the general range of 48-100mm, the thickness of the range of about 1.5-3.0mm.

2. All steel members should be hot-dip galvanized first and then dip plastic anti-corrosion treatment measures, plastic layer color is green;

3. Column and inclined support column of the internal and external surface galvanized 275g/㎡, dipping layer material is polyester, plastic layer thickness is not less than 60μm;

4. Galvanized surface of the mesh is 275g/㎡, the material of the dip layer is PVC, and the thickness of the plastic layer is not less than 0.2mm;

5 welding wire diameter of the final 2.95±0.16mm, the tensile strength of the transverse wire should be greater than 500N/m㎡, the longitudinal wire tensile strength of the mesh should be greater than 700 N/m㎡;

6. Column is made of welding control, tensile strength should be more than 400 N/m㎡;

7. The column spacing of the welding net isolation grid is 3.0m, the column spacing of the end is set to 30m, and a group of longitudinal diagonal support is set with the corner should be set up a transverse diagonal support column;

8. When crossing natural obstacles, transverse and longitudinal diagonal supports should be set at the ends;

9. The spare opening of the end column that is not connected with the diagonal support should be sealed up to prevent rainwater from entering.