Different Color of Perforated metal mesh for Wind Dust Fence

Different Color of Perforated metal mesh for Wind Dust Fence Product Descrition:

The windbreak wall / wind dust fence is based on the principle of aerodynamics. According to the results of the implementation of the on-site environmental wind tunnel test, it is processed into a certain geometric shape, opening ratio and different hole shape combined wind and dust suppression wall, so that the circulating air (strong wind) passes through the wall. In the body, the upper and lower disturbing airflow is formed on the inner side of the wall to achieve the outer strong wind, the inner weak wind, the outer small wind, and the inner side without the wind, thereby preventing the dust from flying.

Production Process:

1 Shear bending: Shearing and bending are important aspects of production. Advanced processing equipment determines the quality of the product.

2 Punching: It is the second link in the production of windproof nets. Professional production workers process high-quality punching products for you.

3 Molding: The third part of the wind-proof net: wind-proof product processing and forming equipment, with continuous forming equipment of double peak and triple peak, the length of the windproof net can be 10 meters or even longer.

4 Cleaning: The fourth step in the production of wind and dust suppression nets is to prepare for the electrostatic spray in the back. The cleaning effect of the cleaning directly affects the quality of the surface spray.

5 Electrostatic spraying: The fifth step of the wind and dust suppression net is to spray the surface of the product to subject the product to various harsh environments without corrosion and rust.

Application: coal mine, coking plant, power plant, port, wharf, steel, building materials, cement and other enterprises factory material yard to prevent wind and dust;Crops windproof, windproof road, high speed on both sides, etc.
1.Give number of sheets needed.
2.Give gauge or thickness of metal.
3.Kind of metal.
4.Give size of perforation, shape, centers and arrangement of holes.
5.Size of sheet.
6.Submit sketch or print when possible.