T8 T10 explosion proof fluorescent lighting / tube light fixtures

Description:

Explosion-proof fluorescent lighting is divided into traditional fluorescent lamps and non-polar fluorescent lamps. Traditional fluorescent lamps, ie low-pressure mercury lamps, use low-pressure mercury vapor to radiate ultraviolet rays during discharge, so that the phosphor emits visible light. Therefore, it belongs to low-pressure arc discharge source. . An explosion-proof discharge lamp that emits phosphors mainly by ultraviolet radiation generated by discharge is called an explosion-proof fluorescent lamp.

Features:

1, with T8LED tube, the light source is energy efficient, more than 50% energy saving than T8 fluorescent tube.

2. Through the unique light distribution design, the light type and illumination angle of the LED light source can be precisely controlled to avoid light pollution and inefficient light utilization; the light is soft and glare-free, which will not cause eye fatigue of the operator and improve work efficiency.

3. The outer casing is made of light aluminum alloy die-casting, and the surface is treated with high-pressure electrostatic spray.

4. There are wiring compartments inside the lamps and special wiring terminals. The user can directly enter the line during installation, and there is no need to set up a junction box for easy installation.

5. When replacing the lamp, just replace the end cap and you can directly replace the lamp.

6, according to customer requirements, matching international famous brand T5 fluorescent tube, high luminous efficiency, more in line with the actual lighting environment, compared with T8 fluorescent tube saving about 30%.

7. The emergency device can be equipped according to the user's requirements. The internal light of the built-in lamp is light. When the external power is cut off, the lamp automatically switches the emergency lighting state.

Scope of application:

It is suitable for emergency safety evacuation and lighting during power outages such as oil exploitation, chemical industry, military and other inflammable and explosive places and environments.
1. Applicable to explosive areas 1 and 2;
2. Applicable to IIA, IIB, IIC explosive gas environment;
3. Applicable to areas of 20, 21 and 22 areas of explosive dust.
4. Explosion-proof mark: Ex d II C T6
5. Protection level: IP65
6. Anti-corrosion grade: WF2