Parallel Double Screw Extruder Machine / Parrallel Twin Screw Extruder Machine

Parallel Double Screw Extruder Machine / Parrallel Twin Screw Extruder Machine HYPET advantages of parallel double screw extruder machine

1. screw & barrel made of nitrided steel and spray special alloy, with longer service life.
2. Screw design according to different materials using different screw structure
3. gearboxes are made with German technology.
4. Output part of the spiral gear distribution box. Hardened and grinding teeth.
5. One end of the output shaft adopts a new type of series combination bearing, the other end of the large thrust bearing to absorb the axial thrust generated in the extrusion process
6. with independent oil cooling and lubrication system composed of special oil pump, oil filter for the gear box and the bearings forcing lubrication, and gearbox oil through the powerful cooler in the closed loop to maintain the gearbox a best oil temperature.
7. Vacuum exhaust system and dust collector with bypass system and vacuum pump.
8. The extruder is mounted on a rigid structural steel frame.
9. Dosing system with twin-screw structure to avoid stagnant material.
10. The electrical cabinet is a plug-in structure, which can be conveniently disassembled and conveniently used in the heating zone of the die head and the barrel heating zone.
11. Pressure sensors and melt temperature sensors with independent detection and independent display structure, reduce trouble and easy to use.

Parallel Double Screw Extruder Machine / Parrallel Twin Screw Extruder Machine Configuration list
Note: This table as attached file which is for selection of the configuration on the whole line

Parallel Double Screw Extruder Machine / Parrallel Twin Screw Extruder Machine Technical features of whole line.

Parallel Double Screw Extruder Machine / Parrallel Twin Screw Extruder Machine Main specification:

Parallel Double Screw Extruder Machine / Parrallel Twin Screw Extruder Machine Photo


Parallel Double Screw Extruder Machine / Parrallel Twin Screw Extruder Machine Terms & conditions
1. Parallel Double Screw Extruder Machine / Parrallel Twin Screw Extruder Machine​ Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer according to the rule.
3) Training on field operation and maintenance for customer's personnel.
4) Provide technical consultation service on long-term basis.

2. Parallel Double Screw Extruder Machine / Parrallel Twin Screw Extruder Machine​ Installation and debugging
When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.
3) This Price does not included commission and installation in buyer’s factory.