Plastic Recycling Extruder Machine / Twin Screw PVC Extruder Machine Output 700kg/H PS107/28

Plastic Recycling Extruder Machine ​HYPET advantages of parallel twin screw extruder

• Barrel and screw Nitro Alloy with bi-metal type for longer working life.
• Screw has internal closed loop heat balancing system by means of distilled water
• Twin output shaft Helical Gear Box. Gears are hardened and ground. Both output shafts are integral with high capacity thrust bearings to absorb axial thrust generated during the extrusion process
• Lubricating pump with Heat Exchanger, oil filter and oil flow indicator are provided for force lubrication of Thrust Gear box. The gears and bearings are forced lubricated. Gear box lube oil is circulated in a closed loop through heat exchanger to maintain optimum oil temperature in gearbox.
• Vacuum degassing system along with dust collector having bypass system & Vacuum pump.
• Extruder mounted on rigid structural steel frame.
• Quantitative feeding system with twin screw structure to avoid stagnant material.
• Display Of Heating current for each temperature zone, manual override on all zones in case of sensor failure.
• Drive control panel, equipped with panel water cooler, placed besides heating control panel with Independent Isolator for essential power supply.
• Other eclectic and pneumatic components are made in world famous brand such as from Japan, Siemens from Germany etc.

Plastic Recycling Extruder Machine ​Configuration list

Note: This table as attached file which is for selection of the configuration on the extruder.

Plastic Recycling Extruder Machine ​Main specification:

Plastic Recycling Extruder Machine ​Picture

Plastic Recycling Extruder Machine ​Terms & conditions

1. Plastic Recycling Extruder Machine ​Training and services

1) Instruction of field installation

2) Equipment field debugging and trial run if required by the buyer according to the rule.

3) Training on field operation and maintenance for customer's personnel.

4) Provide technical consultation service on long-term basis.

2. Plastic Recycling Extruder Machine ​Installation and debugging

When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.

1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.

2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.

3) This Price does not included commission and installation in buyer’s factory.