Screw And Barrel For Plastic Extruder / Twin Conic Screw And Barrel

Screw And Barrel For Plastic Extruder / Twin Conic Screw And Barrel The main components of the extruder

Screw And Barrel For Plastic Extruder / Twin Conic Screw And Barrel Common accessories

Screw And Barrel For Plastic Extruder / Twin Conic Screw And Barrel Image of screw and barrel

Screw And Barrel For Plastic Extruder / Twin Conic Screw And BarrelTerms & conditions

1. Screw And Barrel For Plastic Extruder / Twin Conic Screw And Barrel Training and services

1) Instruction of field installation

2) Equipment field debugging and trial run if required by the buyer according to the rule.

3) Training on field operation and maintenance for customer's personnel.

4) Provide technical consultation service on long-term basis.

2.Screw And Barrel For Plastic Extruder / Twin Conic Screw And Barrel Installation and debugging

When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.

1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.

2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.

3) This Price does not included commission and installation in buyer’s factory.

3. Screw And Barrel For Plastic Extruder / Twin Conic Screw And Barrel Time of delivery

1) When the contract becomes valid, the machine should be delivered within 60 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.

2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.

4.Screw And Barrel For Plastic Extruder / Twin Conic Screw And Barrel Debugging charge

The buyer pays for the plane ticket of round-trip abroad and food and accommodation of buyer’s country during debugging. And the wage of technicians should be paid by the customer (100USD/day).