High Speed Plastic Bottle Blow Molding Machine MP70D-2 For Plastic Medical Bottle

Introduction:

MP70D is specifically designed for making bottles from 50ml up to maximum 5L. It is hydraulic driven with accrate eletrical control system. MP70D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP70D is updated to be one of the most reliable and popular model in the world.

Features

a) Extruding device adopts variable frequency motor which can satisfy the requirements of rotation change of screw during blowing process. Screw with big slenderness ratio can be used to process many kinds of materials and has strong plasticizing ability, high production and low energy consumption. The barrel adopts resistance heater which is controlled by computer and heats quickly ,stably and equably.

b) By installing different head in combined extrusion system between two extrusion machines, they can blow products with view strip line or double layers.

Standard Features:

Auto Lubrication

Water Cooled Modular Blow Pin

Hot Wire Cutting

Positioning Hole For Quick Mold Change

Adjustable Die head

Linear Transducer

FRL(Filter Regulator Lubricator) for Pneumatic

Proportional Hydraulic System fro better control

Swing and Adjustable Extrusion Platform

Installation of mould

Before installing mould, all required tools and lift should be prepared. During installing mould, the following procedure should be followed:

1) Select Manual mode for machine and try to open and close mould several times.

2) Open and move plate to position which allows mould to enter. Use lift to deliver two connected half moulds then connect them with front mould plate by using bolts.

3) Adjust mould level degree and height roughly. Then use bolt to lock front half mould with front mould plate slightly.

4) Joint plate joint and mould slightly with low pressure and low speed. Then use bolt to lock second half mould with middle mould plate slightly.