K95 automatic ear band welding machine.

Qikuai KF95 fish-shaped single-trail single mask machine is an efficient and practical best-selling model developed by Chuangying Times Technology Co., Ltd. The mask all-in-one machine of the present invention is mainly composed of a roll mask feeding machine, a fish-shaped mask filming machine, a connecting machine, an ear-shaped welding machine and a discharge line, which can realize kn95 mask body forming, automatic nose installation, and ear-shaped welding Machine, automatic counting and other functions. The mask forming machine and ear wire welding machine can be produced automatically or independently, with extremely high flexibility.

The kn95 mask filming machine is a drag-type reversing and conveying device. By setting a feed conveying mechanism, a reversing conveying mechanism, and a dual-channel conveying mechanism, one mask filming machine can be organically combined with two mask ear-belt welding rods, and finally Make the earband welding rods evenly and smoothly flip.

There are many varieties of KN95 face mask on the market. Today, let’s analyze the production process of this face mask machine:

Check again the N95 cup machine production video, the chance of the cup inside is a bit different from what we are going to analyze today, but the principle is similar, so I can give you some reference.

The measurement results of the top cover shaft are as follows:

Then, the entire machine cover is marked according to its processes, and then analyzed according to these processes.

1. Raw materials used in the feeding process.

The second is the process mechanism; fabric roll rack

The difference between the N95 and the flat mask machine is that the N95 uses a drive motor, while the flat mask machine uses a placement motor.

Second, tighten the organization.

Third, fabric support.

2. Nose line and embossing processing technology.

Its function is to press multiple layers of fabric, and its principle is: screw down the corrugated handle, and then the spring will compress the slider.

Front-wheel drive and front-wheel drive.

The two input shafts and one output shaft of the convex desktop separator are connected by the following connection methods: the input shaft is connected to the sprocket of the power mechanism and the feed mechanism, and the output shaft is connected to the synchronization wheel of the feed mechanism. The two-axis system is actually a whole, so the power is directly transmitted to the feeding sprocket, and its movement is continuous, and the synchronization wheel of the feeding mechanism connected to the discharge shaft, after passing through the internal mechanism of the separator, becomes Intermittent rotation. The other is a feeding device for the bridge of the nose.

Nose bridge disc guide/transmission mechanism

As far as the lower drum adjustment mechanism is concerned, the difference from the feed mechanism is that the upper drum adjustment screw is first tightened to the upper drum, and then to the spring placed in front of the upper drum (see the figure below)

Trident line charging mechanism.

Its action sequence is: the eccentric wheel rotates, the push rod, the push plate advance forward, and the nose bridge line is fed into the fabric.

Fourth, embossing device.

The power of the embossing mechanism also comes from the power shaft, which is the same as the power shaft of the front nose bridge feeding device and loading mechanism;