Medical KN95 Mask Making Machine / Max. 5 layers

Machine Description

We design this machine with our twenty-five years usefull experience, and also we use some good quality international brand components So this mask making machine is be of stable, efficient, safe and dutable. It is a ideal machine for manufacturing of KN95 face mask.

Production process:

1. automatic forming through coil feeding.

2. automatic feeding.

3. cut off of nose bridge strips and coils.

4. cut off edges of the mask.

5. folding and flattening.

6. ultrasonic welding fusion.

7. molding.

8. automated ultrasonic welding ears belts.

Machine Application

This machine is suitable for the production of KN95 face mask composed of 4-5 layers of non-woven fabric :

1. Inner layer is ordinary non-woven fabric.

2. Middle filter layer (1 or 2 layers) is treated polypropylene melt-blown non-woven fabric.

3. Outer layer is water-repellent non-woven fabric, which is mainly used to isolate people’s saliva droplets.

4. Other layer of fabric is hot air cotton.

Machine Features

1. High stability, low failure rate, beautiful and solid aluminum alloy structure, not rusty.

2. PLC programming control system, HMI, and servo drive system.

3. The whole machine adopts automatic operation from a to z.

4. Ultrasonic welding technology, high efficiency and energy saving.

5. Sensor detection and automatic counting.

6. High capacity: Max. 60 pcs/min, Maximum daily capacity 72000pcs (20 hours)

7. Service: convinient equipment maintainance and prompt online service.

8. Performance: Stable production in customer and Longxingsheng mask factory.

Machine Specification

Machine Pictures

machine details, good quality that you can see

Machine Warranty

The warranty on the machine is 12 months from the date of the final acceptance protocol. 12 months warranty on parts, components and workmanship. If any parts or components, except the consumables, prove to be unserviceable due to defective material or poor workmanship under proper usage, we will replace it free of charge, inclusive of freight, provided that the buyer notifies seller immediately. It is in Seller’s discretion that it may ask the Buyer send the defective material back for manufacturer’s inspection.