SMBJ36CA SMB 600W Surface Mount TVS Transient Voltage Suppressor
Surface Mount TVS Transient Voltage Suppressor Diode SMBJ36CA SMB 600W
SMBJ5.0(C)A~SMBJ220(C)A SMB Datasheet.pdf
Features
-
Optimzed for LAN protection applications
-
Plastic package has Underwriters Laboratory Flammability Classification 94V-0
-
Glass passivated junction
-
600w peak pulse power capability
- Excellent clamping capability
- Fast response time:typically less than 1.0ps from 0v to VBR min
- High temperature soldering guaranteed: 260°C/10S at terminals
-
Low incremental surge resistance
Mechanical Data
- Case: JEDEC DO-214AA molded plastic body over passivated junction
- Terminals: Solder plated, solderable per MIL-STD-750 Method 2026
- Polarity: Color band denotes cathode except for bidirectional types
-
Mounting Position: Any
-
Weight: 0.03 ounce,0.093 grams
-
Low profile package
-
Ideal for automated placement
-
Glass passivated chip junction
-
Available in uni-directional and bi-directional
-
600 W peak pulse power capability
-
Excellent clamping capability
-
Very fast response time
-
Low incremental surge resistance
Maximum Ratings and Characteristics ( Ta=25℃ unless otherwise specified)
Parameter | Symbol | Value | Units |
Peak power disspation (Note 1,2) | Pppm | Minimum 600 | W |
Peak Forward Surge Current (Note 1,2, 3) | IFSM | 100 | A |
Steady State Power Dissipation (Note 3) | PM(AV) | 5 | W |
Maximum instantaneous forward voltage at 50A, unidirectional only | VF | 3.5/5.0 | V |
Notes:
1.Non-repetitive current pulse,per Fig.3 and derated above TA=25°C per Fig.2
2.Mounted on 5.0mm copper pads to each terminal
3.Measured on 8.3ms single half sine-wine.For uni-directional devices only.
4.VF=3.5V on SMB-5.0 thru SMB-90 devices and VF=5.0V on SMB-100 thru SMB-170 devices
TYPICAL APPLICATIONS:
Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication.