Test pcba Board Quick Charge QC Fast Charge Adapter pcb assembly Power Detection Board For wall charger PD charger

Overview

It is a fast charge adapter test board.After decoy,it is a fixed voltage output,the voltage is set with the dial code,and the corresponding fixed voltage is output.Please confirm whether the output voltage matches the demand voltage of the load before use,so as to avoid unnecessary losses caused by burning the load.

Specification

1. Product Name:Fast Charge Adapter Test Board

2. Applicable Protocol:QC2.0/QC3.0 3.Applicable Products:Charger/mobile power

4. Work Temperature:-25℃~85℃ 5.Work Humidity:5%~95%RH 6.Size:66*16*12mm

DIP Switch: 1.Through 8 different combinations of DIP switches,it is decided to output 8 different voltages.

2. The dial switch to the top represents "0",and the dial switch to the bottom represents "1".

3. The switch is at the position of 001,which means the output protocol is QC2.0,the output voltage is 5V,and the green light is on. 4.The switch is at the position of 010,which means the output protocol is QC2.0,the output voltage is 9V,and the red light is on.

5. The switch is at the position of 100,which means the output protocol is QC2.0,the output voltage is 12V,and the blue light is on. 6.The switch is at the position of 011,which represents the protocol of output QC3.0,the output voltage is 5V,and the green light is on. 7.The position of the switch at 101 represents the protocol of output QC3.0,the output voltage is 6V,and the blue-green light is on. 8.The switch is at the 110 position,which represents the protocol of output QC3.0,the output voltage is 9V,and the light is blue-red. 9.The switch is at the position of 111,which represents the protocol of output QC3.0,the output voltage is 12V,and the light is blue-red-green.

Feature:

1. PCBA uses intelligent detection Qualcomm QC2.0-QC3.0 protocol to select the output voltage. 2.It is compatible with all Qualcomm QC2.0-QC3.0 chargers and Qualcomm QC2.0-QC3.0 mobile power products on the market. 3.It uses a toggle switch to select a fixed output voltage for testing aging,and the corresponding LED lights are on. 4.When it is used,there is no possibility of disconnection,and the test data is accurate.

Why Choose us

1. 10 years OEM&ODM factory experiences in Power solutions.

2. Licensed MFI Apple factory

3. Specialized in Mobile Phone Accessories,including Apple MFi car Charger, iphone charger, Wireless

Chargers, wall charger, laptop power supply adapters and so on…

4. Strict QC team control quality

5. OEM/ODM service

6. Small MOQ support

7. Quick Delivery Time

8. Warranty 12 months after-service

9. Continul Technical innovation

Any other concerns, welcome to send your request to email.

Your feedback is the most important for us.