Heater Core Wire 19 strands Cr20Ni80 Nichrome Thermoelectric Alloys Wire

Product brief introduction:

Heater Core Wire is part of the OHMALLOY Precision Wire stranded product range and is manufactured specifically for the On Site Heat Treatment industry.

The stress relieving process of pressure vessels and pipework demands a consistently high quality heater core wire for both efficient assembly of the heater mats and the reliable high rated temperature performance on site. The industry standard alloys and stranded wire sizes are stocked for immediate despatch to service the range of global specifications. In addition, bespoke configurations can also be made to accommodate specific stranded wires and resistances.

OHMALLOY Precision Wire have many years’ experience producing electrical resistance heating wires and we manufacture the individual electrical heating strand wires to the precise resistance to meet the demanding standard of our customer's heater core wire specifications. The heater core wires are made from Nickel Chrome 80/20, Nickel Chrome 60/16, Iron Chrome Aluminum, Nickel and Nickel Manganese 2% (Nickel 212). Each stage of the heater core wire manufacture, from the single wire to the finished stranded wire, it is quality tested to ensure that the heater mats can be constructed as quickly and efficiently as possible. Modern annealing equipment is used to ensure that the stranded wire is produced to the consistent quality that the on-site heat treatment industry demands and expects. New spooling equipment means that each meter of heater core wire can be taken off efficiently, lying flat and without spiralling. Final quality inspection and resistance testing is carried out on each and every stranded wire spool.

The processing of the conductors ensures the finished strand is flexible to aid the manufacture of the various systems in use.

Packing:

Standard spool sizes for the heater core wire are D355's with 500 meters of stranded wire or D250's with 100 meters of stranded wire. Alternatively, the heater core wire can be supplied on other spool types to meet the specific customer requirements.Orders for quantities of Heater Core Wire ranging from 100 metres to over 100,000 metres are all within OHMALLOY Precision Wire capabilities.

Diameter of one strands:0.05mm-8.0mm.Our most common dimension is 0.523mm*18+0.574mm*1,it means the outside is 3mm,but the other conductor sizes are available upon your request.

Material Available:

NiCr80/20, NiCr60/15, Nickel 212, NiMn2, CuNi44

Application: A heating element repair kit comes with 80/20 (19 multi-strand), in addition, Heater Core Wire is Consists of 80/20 nickel chrome alloy (19 multi-strand) on 500m/1640' roll.

Nichrome Stranded Wire is not always 19 multi strand,we can also produce it upon your request.