Household Small feed pellet machine for chicken feed

Introduction of Household Small feed pellet machine for chicken feed:

The Household Small feed pellet machine for chicken feed is specially designed for small domestic chicken farms and can produce chicken feed pellets. The pellet feed produced has a smooth surface, moderate hardness, dry in and dry out, and is convenient for sealed storage. In addition, the equipment can be used not only Processed chicken feed can also process feed pellets such as ducks, geese, and rabbits.

Raw materials for Household Small feed pellet machine for chicken feed:

By purchasing our household Small feed pellet machine, you can receive a variety of poultry animal feed formulas for free, such as corn, straw, grass and other grains and grasses can be processed into feed pellets.

Technical parameter:

Features of Household Small feed pellet machine for chicken feed:

1. Enlarged and thickened white iron material inlet, which is not easy to rot and is convenient for feeding.

2. Widen the discharge port and set a baffle to prevent the feed from being scattered anywhere

3. A variety of apertures are available, the particle size is uniform, full and firm, and not loose in one molding.

4. The pressure wheel adjuster can adjust the distance between the pressure wheel and the grinding disc, which is convenient and quick.

5. The pressure wheel and grinding disc are made of chromium-manganese steel, which has been quenched at high temperature, which is more practical.

Precautions for household Small feed pellet machine:

1. Be sure to add gear oil before the machine is used for the first time to prevent idling and abrasion of the transmission parts.

2. Before turning on the domestic Small feed pellet machine, you need to add less material before turning it on. When turning off the machine, leave a little feed in the machine to prevent the press roller of the machine from contacting with the grinding disc from idling.

3. During granulation, it is strictly forbidden that the pressure roller and the grinding disc contact idling, and the continuous feeding can not be too fast, not too slow, and not interrupted.

4. When there is no granulation and no discharge, the grinding disc should be removed, the blocked feed should be cleaned hole by hole, and some fiber feed can be added appropriately to restart the pelletizing.

5. If the machine is stuck when it is working, it should be shut down immediately, and the distance between the rollers and grinding discs should be adjusted before restarting.