Name | FSCB-PV16/1 |
Electric parameter | |
System maximum DC voltage | 1000 |
Maximum input current for each string | 15A |
Maximum input strings | 16 |
Maximum output switch current | 200A |
Number of inverter | N |
Number of output strings | 1 |
Lightning protection | |
Category of test | Ⅱ grade protection |
Nominal discharge current | 20KA |
Maximum discharge current | 40KA |
Voltage protection level | 3.8KV |
Maximum continuous operating voltage Uc | 1050V |
Poles | 3P |
Structure characteristic | Plug-push module |
System | |
Protection grade | IP65 |
Output switch | DC isolation switch(standard)/DC circuit breaker(optianal) |
SMC4 Waterproof Connectors | Standard |
PV DC FUSE | Standard |
PV Surger protective device | Standard |
Monitoring module | Optional |
Precenting diode | Optional |
Box material | Metal |
Installation method | Wall mounting type |
Operating Temperature | -25℃~+55℃ |
Elevation of Temperature | 2km |
Permissible relative humidity | 0-95%,no condensation |
It is a metal oxide semiconductor non-linear resistance with ZnO as the main component. When the voltage applied to its two ends reaches a certain value, the resistance is very sensitive to voltage. Its working principle is equivalent to the series-parallel connection of multiple semiconductor P-Ns. Varistors are characterized by good non-linear characteristics (I=non-linear coefficient α in CUα), large current capacity (~2KA/cm2), low normal leakage current (10-7~10-6A), and low residual voltage (depending on the Due to the working voltage and current capacity of the varistor, the response time to instantaneous overvoltage is fast (~10-8s), and there is no freewheeling.
The technical parameters of varistors mainly include: varistor voltage (ie switching voltage) UN, reference voltage Ulma; residual voltage Ures; residual voltage ratio K (K=Ures/UN); maximum flow capacity Imax; leakage current; response time .
The use conditions of the varistor are: varistor voltage: UN≥[(√2×1.2)/0.7] U0 (U0 is the rated voltage of the industrial frequency power supply)
Minimum reference voltage: Ulma≥(1.8~2) Uac (used under DC conditions)