Requirements for carbon additives in converter steelmaking
In converter smelting of medium and high carbon steel grades, petroleum coke with very little impurities is used as a carbon additive. The requirements for carbon additives for top-blown converter steelmaking are that the fixed carbon should be high, the ash, volatile matter and sulfur, phosphorus, nitrogen and other impurity contents should be low, and it should be dry, clean and with moderate particle size. Its fixed carbon ωC≥96%, volatile matter≤1.0%, ωS≤0.5%, moisture≤0.5%, and the particle size is 1~5mm; if the particle size is too fine, it is easy to be burned off; if too coarse, it floats on the surface of the molten steel and is not easy to be absorbed by the molten steel.
Specifications
Packing & Delivery
Packing: 1 ton big bag, 20-25mt in 20' container
Our Services
We can try our best to provide you the good services as below:
1.We have Experienced staffs .
2.Provide kinds of certificates.
3.24 hours on line to answer all your questions .
4.The content packing particle size may be based on customer demand.
5.Quality can be guaranteed. we provide safe products to our users.