Pig Manure Horizontal Fertilizer Mixer Machine for Making Organic Fertilizer

Introduction of Pig Manure Horizontal Fertilizer Mixer Machine for Making Organic Fertilizer

This series of horizontal mixing (blending) machine is a new generation of mixing equipment developed by our company. It has a high mixing degree and less residue. The horizontal mixer is suitable for mixing organic and inorganic fertilizer.

The specific features of horizontal blender machine as following: the material can be fully mixed, thus improving the mixing uniformity; the new rotor structure be used to make the gap between the rotor and the casing close to zero, thus effectively reducing the residual amount of the material; the special rotor design of the machine can also break the larger material, the overall structure is more reasonable, the appearance is beautiful, and the operation and maintenance are convenient.

Features of Pig Manure Horizontal Fertilizer Mixer Machine for Making Organic Fertilizer

1. When horizontal mixer working, the material in the machine is operated by two opposing rotors, and the compound motion is carried out.

2. The slurry drives the material to rotate counterclockwise along the inner wall of the machine groove.

3. On the one hand, it drives the material to turn around, forming a weightless zone outside the overlap of the two rotors. In this area, no matter the shape, size and density of the material, the material can be floating in an instantaneous weightlessness state.

4. This makes the material in the machine groove form an Omni-directional continuous loop, alternating shear, so as to achieve fast and soft mixing uniform effect.

Parameter of Pig Manure Horizontal Fertilizer Mixer Machine for Making Organic Fertilizer

Advantages of Pig Manure Horizontal Fertilizer Mixer Machine for Making Organic Fertilizer

1. Horizontal tank body covers a small area
2. Bearing is on both ends of the mixer, the material is not easy to enter, repair rate is low.
3. The gearbox drives the auger shaft, simple maintenance, high efficiency, save both time and labour.
4. U- Shape tank bottom, easy operate, stir uniformly, no dead angle, better for material discharge and cleaning.
5. Under the bottom or the sides of the tank, there is a flap dome valve (pneumatic control or manual control) of the centre. The valve is arc design to make sure no material deposit and no dead angle when mixing. There are a lid and fence on the top of the tank, it seals the tank well so that no powder will come out during mixing