Bio Organic Fertilizer Wet Material Drying And Cooling Machine
Introduction to Bio Organic Fertilizer Wet Material Drying And Cooling Machine
This fertilizer cooler machine is used for the production of compound fertilizer and organic fertilizer, cooling fertilizer pellets with certain temperature. Using dryer together can greatly improve the cooling rate, reduce labor intensity and improve the quality, further remove moisture, reduce the grain temperature of fertilizer. At the same time, it also can be used for cooling powder and other granules materials.
Specifications of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
Model | shell | Feed temperature | Discharge temperature | Motor | Decele vators model | |||||
Inner diam | length | inclination | Rotation speed | Model | Power | Rotation speed | ||||
mm | mm | 0 | r/min | °C | °C | Kw | r/min | |||
LQ10100 | 1000 | 10000 | 2-5 | 4.6 | 60-80 | <40 | Y132m-4 | 7.5 | 1440 | ZQ350 |
LQ12120 | 1200 | 12000 | 2-5 | 4.6 | 60-80 | <40 | Y132m-4 | 7.5 | 1440 | ZQ350 |
LQ15120 | 1500 | 12000 | 2-5 | 5 | 60-80 | <40 | Y160L-4 | 15 | 1440 | ZQ400 |
LQ15150 | 1500 | 15000 | 2-5 | 5 | 60-80 | <40 | Y160L-4 | 15 | 1440 | ZQ500 |
LQ18160 | 1800 | 16000 | 2-5 | 5 | 60-80 | <40 | Y200 L1-6 | 18.5 | 970 | ZQ500 |
LQ20200 | 2000 | 20000 | 2-5 | 60-80 | <40 | Y200 L1-6 | 22 | 970 | ZQ650 |
Working principle of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
This rotary drum fertilizer cooling machine adopts heating exchange method to cool materials. It is equipped with welded steel spiral scraping wings in front of the tube, lifting board at the end of the rotary body, and auxiliary piping system in the feed end of the cooling machine. The belt and pulley are driven by the main motor and through the reducer the drive shaft is put in motion. The open gear installed on the driving shaft and big bear ring installed on the body working together under the rotation of drive shaft. The evaporator absorbs heat and the condenser emits heat. With the working of fan, moist air enters from the left air inlet and takes heat exchange through evaporator to achieve the purpose of insulation and dehumidification of air. After being dried by rotary drum dryer, fertilizer granules are sent into the cylinder through the feed box. In the rotating tube, the materials are picked by the lifting board and spread evenly. The high temperature materials interact with the upstream of the cold air and the heat within the materials diffuse to the surface and taken away. Then the materials are collected through discharging hole.
Features of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
1. This rotary cooling machine uses high quality anticorrosion and wear-resistant materials which greatly improve the service life of the machine.
2. Reasonable design of lifting board helps to maximize heat transfer between the high-temperature material and the cooling air. It can improve the cooling efficiency and cool the materials evenly.
Advantages of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
1. With reasonable design of lifting blade, it has dependable performance.
2. Energy-saving, even cooling, easy to clean and maintain.
3. High efficiency
4. Compact structure
Applications of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
The rotary cooler can be used in many different industries, such as metallurgy materials, construction materials, food industry, light industry, chemical industry, mining industry, cement production lines etc.