Product Description
1. When KN95 receives contamination such as saliva, blood, tears and other body fluids, it must be replaced
2. The user obviously feels that the breathing resistance is greater than before and must be replaced
3. Masks are damaged and must be replaced
4. It is recommended to replace it after using it 4 times.
5. However, masks cannot be reused if people go to the hospital, come into contact with an infected person, or are suspected to be infected.
Feature
- Anti coronavirus, anti dust and virus.
- Disposable Great elasticity face mask.
- Non woven face mask is made of spunbonded non woven fabric and melt blown non woven fabric
- Low respiratory resistance, no odor, no irritation.
- Use ultrasonic welding technology, comfortable wearing, breathable, hygienic, and biodegradable.
Specifications
Color | White |
Product name | KN95 Face Mask |
Dimensions | 160*110*5mm±5mm |
Inner layer | PP needle-punched nonwoven |
Filter media | PP meltblown high filtration layer |
Outer layer | PP spunbond |
Adjustable nose clip | Aluminum-90*5mm |
Soft foam nosepiece | PU doam-90*5mm |
Elastic head band | Latex-free elastic-width 7mm |
Advantages
Ar, dust, filtration sterilization,particulate ultrasonic sealed edge, comfortable to wear.Can prevent dust and microorganism good, long time do not wear tight, no allergic reaction, using a smooth cloth to reduce fibre shedding, disposable, maintenance free,convenient and practical, safe and hygienic.
Usage
Non-woven mask for disposable goods, convenient use, and make relevant purification treatment, can be used for food. The medical, pharmaceutical, electronics.Textiles. Clean room operators, but also to do dailyactivities using other industry. The mask has been sterilized in the production process.
Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its required for use.
- Use the respirator in accordance with applicable health and safety regulations.
- Fit the respirator and check leak-tightness before entering the contaminated area.
- Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.
