Humanized design vertical laminar airflow cabinet with beautiful appearance

1. Vertical laminar flow cabinet description:

Product Principe:

The principle of a laminar flow cabinet: a clean environment is formed in a specific space where clean air (inlet air) flows in a set direction. Divided by the direction of the airflow, the existing ultra-clean workbench can be divided into vertical, from the inside to the outside or to the side.Considering the quality of operation and the impact on the environment, it is superior in vertical mode.The clean air supplied by the air supply filter plate descends through the operation area at a specific speed, is separated in the middle of the operation area, is sucked away by the front air suction hole and the rear suction window, and the air sucked in the front and rear portions at the lower portion of the operation area is mixed together, and pumped into the rear positive pressure zone by a blower. In the upper part of the machine, 30% of the gas is discharged from the top through the exhaust filter, and approximately 70% of the gas is re-entered into the operating zone through the oxygen supply filter. To supplement the air discharged from the exhaust port, the same volume of air is replenished from the room air through the operating port. This air will never enter the operating area, just forming an air barrier.

Structural Features:
1).Adopts mini-pleated HEPA filter to minimize the plenum, with stainless steel table-board and glass atside make the whole work area spacious and bright;

2).Easy removal prefilter with big air volume for better protection of HEPA filter and ensure the wind speed;

3) , adjustable air flow systems to make work area in ideal status;

4) , Vertical flow type, open desktop, easy to operate.

Performance Features:

● Provide an operating environment with a cleanliness level of 100. For dust particles with a particle size ≥ 0.5 μm ≤ 3.5 particles/liter

● Horizontal laminar flow type or vertical laminar flow type

● Ultra-thin high efficiency air filter without partitions, small footprint

● With touch-type electronic control panel, the fan air flow can be adjusted steplessly to ensure that the wind speed in the work area is always in an ideal state.

● Stainless steel worktable, plexiglass enclosure, can be equipped with UV remote control electrical interface

2.Laminar flow cabinet parameter

Customized design is welcome.

3.Production detail photos