Aluminum alloy air duct diffuser with Nylon mesh primary filter

1. Return air grille vent cover description

Construction:

· Frame: High quality extruded aluminum alloy(A6063) profile with 30mm flange as standard.

· Blades: Aerofoil blades in 45° from aluminum profile

· Blades spacing: 35mm as standard

· Support pipe: 8mm diameter aluminum pipe

Description:

The louver return air window is often used for suction and air supply in the pipeline. At the same time, it can be equipped with a herringbone gate (multi-leaf split control valve) according to the actual situation to control the air volume or install the aluminum alloy filter for supporting use. The blades can be divided into horizontal and vertical, and can be flexed left and right or up and down to control the airflow direction.

Surface Finish:

· Powder coated color finish as per RAL color----standard color: RAL9016, 9010

· Natural anodized aluminum finish

2.Double deflection grille features:

1), single layer / double layer adjustable blade, can get different air supply distance and different diffusion angle

2), can be used as air supply and return air

3), optional aluminum or iron production

4). Use with the regulating valve separately for the air supply port

5), can be made into an openable structure for the return air outlet, and used with the filter

3.Return air grille vent cover adhibition

1).Widely used in air conditioning system as air outlet, according to the requirements, the air outlet can be prepared behind the aluminum air flow control valve (Hue word gate), double louver air outlet with two layers of vertical pages to adjust the horizontal and vertical page angle, adjust Air diffuser surface, to change the range, the air outlet frame width has two kinds of wide frame and narrow frame, can be used for special requirements of the ventilation system.

2). Usually installed on the pipe or side wall as a side air outlet. The double louver air outlet has two movable blades with adjustable angle. The short blades are used to adjust the spread angle of the air supply air, and can also be used to change the direction of air flow; The blades can make the supply air flow attached to the ceiling or tilt down at a certain angle (when heating the air). The outer blades of a double shutter air outlet or the blades of a single louver air outlet can be parallel to the long side or parallel to the short side , can choose according to the customer's request.

4. Standard Model Technology Parameter