fiber optic splice closure ETC-H009
1. Scope of application This Installation Manual is suit for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation. The scope of application is: aerial, underground, wall-mounting, duct-mounting, handhole-mounting. The ambient temperature ranges from -40℃ to +65℃. 2. Basic structure and configuration 2.1 Dimension and capacity Outside dimension (LxWxH) | 470x180x125 (mm) | Weight (excluding outside box) | 2650g-2975g | Number of inlet/outlet ports | 3 (pieces) on each side (total 6 pieces) | Diameter of fiber cable | Φ8—Φ20 (mm) | Capacity of FOSC | Bunchy: 12—96 (Cores) Ribbon: max. 144(Cores) |
2.2 Main components No. | Name of components | Quantity | Usage | Remarks | 1 | Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter: 320x120x100(mm) | 2 | Fiber optic splice tray (FOST) | max. 6 pcs (bunchy) max. 4pcs (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:12,24(cores) Ribbon:3 (pieces) | 3 | Foundation | 1 set | Fixing reinforced core of fiber- cable and FOST | | 4 | Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | | 5 | Port plug | 6 pieces | Sealing empty ports | | 6 | Pressure testing valve | 1 set | After injecting air, it is used for pressure testing and sealing testing | Configuration as per requirement | 7 | Earthing deriving device | 1 set | Deriving metallic components of fiber cable in FOSC for earthing connection | Configuration as per requirement | | | | | | |
|