For overhead power lines under 110kV, PE outer sheath is applied.
FOR power lines equal to or over 110kV, AT outer sheath is applied.
The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans.
Aerial Self-supporting All Dielectric 24 48 96 Core ADSS Cable Span 200m Single Jacket Fibra Optica Cable with FRP
Double Layer Aerial ADSS Cable is used for communication cable of overhead high-voltage electricity transmission system,
it also can be used as communication cable at the areas where lighting is frequent or distance is big.
ADSS cable is loose tube stranded.
Fibers, 250μm , are positioned into a loose tube made of high modulus plastics.
The tubes are filled with a water-resistant filling compound.
The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core.
After the cable core is filled with filling compound.
it is covered with thin PE (polyethylene) inner sheath.
After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed.
For overhead power lines under 110kV, PE outer sheath is applied.
FOR power lines equal to or over 110kV, AT outer sheath is applied.
The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans.
Ordering Information
Packaging Details
1.Wooden reel, 1000m/reel, 2000m/reel, 3000m/reel, customer's requirements are also welcomed;
2.Inner packed in fumigated wooden drum, and outer covered by polyethelene sheet, then sealed by strong wooden battens.