LC Connector 60KM 155Mbps Optical Transceiver Module BIDI TX1550nm RX1490nm SFP
PRODUCT DESCRIPTION
155Mbps SFP BIDI Optical Transceiver Module is small form factor pluggable module for bi-directional serial optical data communications such as STM-8, OC-24,Fiber Channel, It is SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of 1550nm.
155Mbps SFP BIDI Optical Transceiver Module Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the PIN photo-detector .The module data link up to 60KM in 9/125um single mode fiber.
APPLICATIONS
Switch to Switch Interface
Fast Ethernet
Switched Backplane Applications
Router/Server Interface
Other Optical Links
PRODUCT FEATURES
Operating Case Temperature: Commerical:0 to 70 °C Industrial:-40 to 85 °C
Compliant with MSA SFP Specification
Digital Diagnostic Monitor Function Compatible with SFF-8472
2 years warranty
Simplex LC Connector Interface
Hot Pluggable,Metal enclosure, for Lower EMI
Distance up to 60KM
Single 3. 3V Power supply
Operating data rate up to 155Mbps
Tx1550/Rx1490, 1550nm DFB Laser, 1490nm PIN-TIA
DDM function optional
Specification of Transmitter
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
Average Output Power | POUT | -4 | 1 | dBm | Note (1) | |
Extinction Ratio | ER | 8.2 | dB | |||
Center Wavelength | λC | 1500 | 1550 | 1580 | nm | FP Laser |
Spectrum Bandwidth(-20dB) | σ | 1 | nm | |||
Differential Line Input Impedance | RIN | 90 | 100 | 110 | Ohm | |
Output Eye Mask | Compliant with G.959(class 1 laser safety) | Note (2) |
Note (1): Measure at 2^23-1 NRZ PRBS pattern
Note (2): Transmitter eye mask definition
Specification of Receiver
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
Input Optical Wavelength | λIN | 1483 | 1490 | 1495 | nm | |
Receiver Sensitivity | PIN | -34 | dBm | Note (1) | ||
Los Of Signal Assert | PA | -40 | dBm | |||
Los Of Signal De-assert | PD | -35 | dBm | Note (2) | ||
LOS Hysteresis | PA-PD | 0.5 | 2 | 6 | dB | |
Receiver Overload | Pmax -PIN | -3 | dBm |
Note (1): Measured with Light source 1490nm, ER=8.2dB; BER =<10^-12 @PRBS=2^23-1 NRZ
Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)