1.25G/s Connector 40KM Gigabit SFP Module LCConnector TX1310nm

PRODUCT FEATURES

Compliant with MSA SFP Specification

Digital Diagnostic Monitor Function Compatible with SFF-8472

Distance up to 40KM

Up to 1.25Gbps data rate

Single +3.3V power supply

Duplex LC receptacle optical interface compliant

Hot pluggable

Receiver Loss of Signal out

Serial ID module on MOD(0~2)

International Class 1laser safety certified

Transmitter disable input

2 years warranty

PRODUCT DESCRIPTION

An optical module, also called fiber optic transceiver or optical transceiver, is a typically hot-pluggable device used in high-bandwidth data communications applications. Transceiver modules typically have an electrical interface on the side that connects to the inside of the system and an optical interface on the other side that connects to the various devices through a fiber optic cable. An optical module functions as a photoelectric converter which converts the electrical signal into light and vice versa.

1.25Gb/S SFP Duplex Optical Transceiver Module Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector .The module data link up to 40KM in 9/125um single mode fiber.

This module is designed to be compliant with SFF-8472 SFP Multi-source Agreement (MSA)

The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Specification of Transmitter

Note (1): Measure at 2^23-1 NRZ PRBS pattern

Note (2): Transmitter eye mask definition

Specification of Receiver

Note (1): Measured with Light source 1310nm, ER=8.2dB; BER =<10^-12 @PRBS=2^23-1 NRZ

Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)