TX 1310nm Laser 1.25Gbps Gigabit SFP Module RX1550nm SM Simplex LC 40KM BIDI
PRODUCT FEATURES
Up to 1.25Gb/s Data Links
Hot-Pluggable
Single LC connector
Up to 40 km on 9/125μm SMF
1310nm FP laser transmitter
1550nm PIN-TIA
Single +3.3V Power Supply
Monitoring Interface Compliant with SFF-8472
Maximum Power <1W
Industrial / Commercial operating temperature range: -40°C to 85°C/0°C to 70°C Version available
2 years warranty
PRODUCT DESCRIPTION
1.25Gbps SFP BIDI Optical Transceiver Module is small form factor pluggable module for bi-directional serial optical data communications such as STM-8, OC-24,Fiber Channel, It is SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm.
SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 40km transmission distance with SMF.The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Applications
Fiber Channel
Switch to Switch interface
Switched backplane applications
Router/Server interface
Other optical transmission systems
Recommended Operating Conditions
Parameter | Symbol | Unit | Min | Typ | Max |
Storage Temperature Range | Ts | ℃ | 0 | 70 | |
Power Supply Voltage | Vcc | V | 3.135 | 3.465 | |
Data Rate | Gb/s | - | 1.25 | - |
Specification of Transmitter
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
Average Output Power | POUT | -3 | 1 | dBm | Note (1) | |
Extinction Ratio | ER | 8.2 | dB | |||
Center Wavelength | λC | 1260 | 1310 | 1360 | nm | FP Laser |
Spectrum Bandwidth(-20dB) | σ | 4 | nm | |||
Differential Line Input Impedance | RIN | 90 | 100 | 110 | Ohm | |
Output Eye Mask | Compliant with G.959(class 1 laser safety) | Note (2) |
Note (1): Measure at 2^23-1 NRZ PRBS pattern
Note (2): Transmitter eye mask definition
Specification of Receiver
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
Input Optical Wavelength | λIN | 1500 | 1550 | 1580 | nm | |
Receiver Sensitivity | PIN | -24 | dBm | Note (1) | ||
Los Of Signal Assert | PA | -35 | dBm | |||
Los Of Signal De-assert | PD | -28 | dBm | Note (2) | ||
LOS Hysteresis | PA-PD | 0.5 | 2 | 6 | dB | |
Receiver Overload | Pmax -PIN | -3 | dBm |
Note (1): Measured with Light source 1550nm, ER=8.2dB; BER =<10^-12 @PRBS=2^23-1 NRZ
Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)