BiDI Gigabit SFP Module 1.25Gb/S LC Single Mode Fiber Module 10KM 1310nm/1550nm

PRODUCT DESCRIPTION

1.25Gbps SFP BIDI 20KM Optical Transceiver Module Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the PIN photo-detector .The module data link up to 40KM in 9/125um single mode fiber.

The transceiver consists of three sections: a LD laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

The SFP transceivers are high performance, cost effective modules supporting 1.25Gbps/1.0625Gbps data-rate and 20km transmission distance with SMF.

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Applications

NIC network cards

Switches

Routers

VPN equipment

Traffic control device

GAP

Fiber Media Converter

Firewall

Storage device

Telecommunication

Fiber Channel

PRODUCT FEATURES

Data-rate of 1.25Gbps/1.063Gbps operation

1310nm FP laser and 1550nm PIN-TIA for 20km transmission

Compliant with SFP MSA and SFF-8472 with simplex LC receptacle

Digital Diagnostic Monitoring:

Internal Calibration or External Calibration

Compatible with SONET OC-24-LR-1

+3.3V single power supply

Operating case temperature:

Commercial : 0 to +70°C

Industrial : -40 to +85°C

Recommended Operating Conditions

Specification of Transmitter

Note (1): Measure at 2^23-1 NRZ PRBS pattern

Note (2): Transmitter eye mask definition

Specification of Receiver

Note (1): Measured with Light source 1550nm, ER=8.2dB; BER =<10^-12 @PRBS=2^23-1 NRZ

Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)