TX1330nm DFB RX1270nm Single Mode Fiber Module LC 10 Gigabit 10KM BIDI SFP+
PRODUCT FEATURES
Operating case temperature:
Standard: 0 ~ 70 °C
Supports 9.95Gb/s to 10.3Gb/s data rates
Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
Single 3.3V Supply
Up to 10km on 9/125um SMF
1330nm DFB Laser transmitter,1270nm receiver
SFP+ MSA SFF-8431 Compliant
Digital Diagnostic SFF-8472 Compliant
PRODUCT DESCRIPTION
SFP+10G Single-Mode Transceiver is SFP+ modules for duplex data communication as 8G Fiber Channel, IEEE 802.3ae 10G Base-LR/LW It is SFP+ 20-PIN Connector to allow hot plug capability.
SFP+10G modules Complaint with IEEE 802.3ae 10GBASE-LR,Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit SFP module “SFP+”,1330nm DFB transmitter, PIN photo-detector,LC connector,2-wire interface for management specifications compliant with SFF 8472 digital diagnostic, Compliant with SFF8472 Digital Diagnostic Standard(DDM)
The SFP+10G modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.It is a mallest 10G form factor Supports 10GBASE Ethernet and OTU2/OTU2e .
Applications
10GBASE-LR at 10.3125Gbps
10GBASE-LW at 9.953Gbps
10GBASE-BX
Other Optical Links
Parameter | Symbol | Min. | Typ. | Max. | Unit | Notes |
Maximum Supply Voltage | Vcc3 | -0.5 | - | 4.0 | V | |
Storage Temperature | TS | -40 | - | 85 | °C | |
Operating Humidity | - | 5 | - | 95 | % | |
Maximum Supply Voltage | Vcc3 | -0.5 | - | 4.0 | V |
Parameter | Symbol | Min. | Typ. | Max. | Unit | Notes |
Power Supply Voltage | Vcc | 3.13 | 3.30 | 3.47 | V | |
Power Supply Current | Icc | - | - | 300 | mA | |
Case Operating Temperature | Top | 0 | - | 70 | °C | |
Data Rate | - | - | 10.3125 | - | Gb/s | |
9/125um G652 SMF | Lmax | - | - | 10 | Km |
Spec
Parameter | Symbol | Min | Typ | Max | Unit | Ref. |
Transmitter | ||||||
Output Opt. Power | PO | -6.5 | 1 | dBm | ||
Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
RMS Spectral Width(-20dB) | σ | 1 | nm | |||
Optical Extinction Ratio | ER | 3.5 | 4.5 | dB | ||
Tx Jitter(SONET)20KHZ-80MHZ | Txj1 | 0.3 | UI | 3 | ||
Tx Jitter(SONET)4MHZ-80MHZ | TXj2 | 0.1 | UI | 3 | ||
Path penalty at 800ps/nm@9.95Gb/s | 2 | dB | ||||
Relative Intensity Noise | RIN | -128 | dB/Hz | |||
Center Wavelength | λc | 1320 | 1330 | 1340 | nm | |
Receiver | ||||||
RX Sensitivity @10.3 Gb/s | SENS | -14 | dBm | 1,2 | ||
Receiver Overload | -1 | dBm | ||||
Optical Center Wavelength | λC | 1260 | 1270 | 1280 | nm | |
LOS De-Assert | LOSD | -17 | dBm | |||
LOS Assert | LOSA | -30 | dBm | |||
LOS Hysteresis | 0.5 | 2 | 6 | dB |
Notes:
1. Measured with conformance signals defined in FC-PI-2 Rev. 10.0 specifications.
2. Measured with PRBS 231-1 at 10-12 BER.
3. GR-253-CORE Issue 4.
4. With optical input power at the receiver between -1 ~ -11dBm