Single Mode Fiber Module 100BASE SFP BIDI 10KM 1550nm/1310nm LC Connector

Applications

Fiber Channel

Switch to Switch interface

Switched backplane applications

Router/Server interface

Other optical transmission systems

PRODUCT DESCRIPTION

The SFP Module compliants with Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.

The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

155Mbps SFP BIDI Optical Transceiver Module Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of four sections: the LD driver, the limiting amplifier, the 1550nm DFB laser and the PIN photo-detector. The module data link up to 10KM in 9/125um single mode fiber.

The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.

PRODUCT FEATURES

Hot-Pluggable

Up to 10 km on 9/125μm SMF

1550nm FP laser transmitter

1310nm PIN-TIA

Up to 155Mb/s Data Links

Single LC connector

Single +3.3V Power Supply

Monitoring Interface Compliant with SFF-8472

Maximum Power <1W

Industrial / Commercial operating temperature range: -40°C to 85°C/0°C to 70°C Version available

2 years warranty

Specification of Transmitter

Note (1): Measure at 2^23-1 NRZ PRBS pattern

Note (2): Transmitter eye mask definition

Specification of Receiver

Note (1): Measured with Light source 1310nm, ER=8.2dB; BER =<10^-12 @PRBS=2^23-1 NRZ

Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)

Recommended Operating Conditions