1.25G SFP LC Fiber Optic SFP Module 40KM Distance 1550DFB Laser SM BIDI Single Mode

PRODUCT DESCRIPTION

The SFP Module compliants with Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.

1.25Gbps SFP BIDI 40KM Optical Transceiver Module Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFP laser and the PIN photo-detector .

Transceivers are a high performance, cost effective module which have a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 20dB link budge ensure this module 1000Base-LX Ethernet 40km application.

PRODUCT FEATURES

+3.3V single power supply

Operating case temperature:

Commercial : 0 to +70°C

Industrial : -40 to +85°C

Data-rate of 1.25Gbps/1.063Gbps operation

1550nm DFB laser and 1310nm PINTIA for 40km transmission

Compliant with SFP MSA and SFF-8472 with Simplex LC receptacle

Digital Diagnostic Monitoring:

Internal Calibration or External Calibration

Compatible with SONET OC-24-LR-1

Applications

Fiber Channel

Switch to Switch interface

Switched backplane applications

Router/Server interface

Other optical transmission systems

Recommended Operating Conditions

Specification of Transmitter

Note (1): Measure at 2^23-1 NRZ PRBS pattern

Note (2): Transmitter eye mask definition

Specification of Receiver

Note (1): Measured with Light source 1310nm, ER=8.2dB; BER =<10^-12 @PRBS=2^23-1 NRZ

Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)