32 Way G657A1 Fiber Optic Splitter 1x32 PLC Splitter Terminal Box
1*32 PLC Splitter PLC Splitter Terminal Box Hot Selling Fiber Optic Equipment 32 Way Fiber Optic PLC Splitter
Planar lightwave circuit (PLC) splitter is an optical power distribution device based on the integrated waveguide of
Specification of PLC Splitter
Parameter | Unit | Specification (P Grade) | |||||
Operation Wavelength | nm | 1260~1650 | |||||
Channel Number | 1X2 | 1X4 | 1X8 | 1X16 | 1X32 | 1X64 | |
Insertion Loss with Connector (Max) | dB | 4.1/4.4 | 7.4/7.9 | 10.5/11.0 | 13.8/14.1 | 17.1/17.4 | 20.4/21.0 |
Insertion Loss without Connector (Max) | dB | 3.8/4.1 | 7.1/7.6 | 10.2/10.7 | 13.5/13.8 | 16.8/17.1 | 20.1/20.7 |
Uniformity (Max.) | dB | 0.6 | 0. 7 | 0.8 | 1.0 | 1.5 | 2.0 |
Polarization Dependent Loss | dB | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 |
Return Loss | dB | ≥45(PC);50(UPC);60(APC) | |||||
Directivity | dB | ≥55 |
Parameter | Unit | Specification (P Grade) | |||||
Operation Wavelength | nm | 1260~1650 | |||||
Channel Number | 2X2 | 2X4 | 2X8 | 2X16 | 2X32 | 2X64 | |
Insertion Loss with Connector (Max) | dB | 4.4/4.6 | 7.7/8.1 | 10.8/11.3 | 14.1/14.4 | 17.4/17.7 | 20.6/21.3 |
Insertion Loss without Connector (Max) | dB | 4.1/4.3 | 7.4/7.8 | 10.5/11 | 13.8/14.1 | 17.1/17.4 | 20.3/21.0 |
Uniformity (Max.) | dB | 0.6 | 0. 7 | 0.8 | 1.0 | 1.5 | 2.0 |
Polarization Dependent Loss | dB | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | 0.5 |
Return Loss | dB | ≥45(PC);50(UPC);60(APC) | |||||
Directivity | dB | ≥55 |
Environmental Conditions:
Operating Temperature | ℃ | -40~+85 |
Storage Temperature | ℃ | -40~+85 |
Operating Humidity | %RH | ≤93 |
Storage Humidity | %RH | ≤93 |
Cable Infor
Fiber type | G657A1 |
Pigtail cable | 900um |
Connector | SC, LC,FC,ST,……. |
2xN Splitter | Only Single Chip |
Dimension (mm)
Splitter | 1X2 | 1X4 | 1X8 | 1X16 | 1X32 | 1X64 |
Cassette size | 60×7×4 | 60×7×4 | 60×7×4 | 60×12×4 | 80x20x6 | 100x40x6 |
Splitter | 2X2 | 2X4 | 2X8 | 2X16 | 2X32 | 2X64 |
Cassette size | 60×7×4 | 60×7×4 | 60×7×4 | 60×12×4 | 80x20x6 | 100x40x6 |
Application
The bare PLC splitter can allow a single GPON network interface to be shared among many subscribers and allow service providers to enable bandwidth-intensive applications. The following figure shows 1X8 bare PLC fiber splitter interconnected with GPON OLT and ONT through fiber optic splice closure
Being installed in an outside plant enclosure, PON splitter is used to distribute or combine optical signals, which gives carriers the ability to split optical signals to multiple homes or businesses.
Best Alternative for FTTx Solution
Being installed in an outside plant enclosure, PON splitter is used to distribute or combine optical signals, which gives carriers the ability to split optical signals to multiple homes or businesses