SC SC2 FC Fiber Optic Tools Connector Cleaning Swab Stick 2.5mm
Fiber Connector Cleaning Swab Stick
To clean the end face of connectors already installed in patch panels and hardware devices, you insert the stick into the bulkhead adapter or receptacle, make the tip contact the connector end face, make a single turn and then pull the stick out and dispose. You should never reuse a stick. The Stick Type Connector Cleaner uses dry alcohol-free cloth, its stick-type shape makes it a superb tool for cleaning connector ferrule end face located in difficult spots inside the adaptors. One piece of stick type cleaner can be used for four wipes for equipment construction and one wipe for maintenance purpose. Two models serve almost all types of connectors.
Features:
● Easy to use and efficient. Delivers a consistently high level of cleaning performance.
● Easy to clean ferrule end-faces inside the plug-in fiber-optic connectors and various adaptors.
● Lightweight and safe to use. Compact and disposable.
● Suitable for cleaning inside adaptors due to dust control.
Specification
Part No | FCCS-1 | FCCS-2 | FCCS-3 | |
Specfication | Type 2.5mm | Type 1.25mm | Type 2.0mm | |
Cleans per stick | Maintenance (for repair) 1 cleaning / piece | |||
Connectors cleaned | SC SC2 E2000 FC ST DIN | MU, LC | D4 | |
Dimension | 146 | 101 | 146 | |
Packaging | 100 pcs/set | 100 pcs/set | 100 pcs/set |
Why Should We Clean the Connectors?
For best optical performance, one of the most basic and important procedures for the maintenance of fiber optic systems is to clean the fiber optic equipment.
OMC’s Fiber Optic Clean swab Sticks is an excellent dissipative swab for both dry cleaning and wet cleaning. It is the ideal tool for cleaning bulkheads after installation. It is often used to remove any contaminants on the end faces of connectors and inside the adapters.
Fiber Optic Cleaning Guide
Please note the cleaner is applicable for both connectors and adapters.