Single Mode Duplex Fiber Optic Patch Cord LC - LC yellow color
Product Description
Fiber Optic Patch Cord is important of optical network. They have same or different connectors which are installed on the end of fiber optic cable. Fiber optic patch cables are used in two major application areas: computer work station to outlet and patch panels or optical cross connect distribution center. The Fiber Optic Patch Cord series comes with a comprehensive collection of lengths and connectors to fulfill your demand for the deployment.
Feature
1). Low Insertion loss
2). High return loss
3). Good Repeatability
4). Good Interchange
5). Excellent Environmental Adaptability
Specification
Type | Standard,Master |
Style | LC,SC,ST,FC.MU,DIN,D4,MPO, SC/APC,FC/APC,LC/APC.MU/APC |
Fiber | Singlemode/Multimode |
50/125, 62.5/125 (Multimode) OM2&OM1 | |
50/125, 10G (Multimode) OM3 | |
Cable | Simplex, Duplex |
Φ3.0mm, Φ2.0mm, Φ0.9mm | |
PVC or LSZH | |
Polishing Manner | UPC,SPC,APC (8°& 6°) |
Insertion Loss | ≤ 0.1dB (For Singlemode Master) |
≤ 0.25dB (For Singlemode Standard) | |
≤ 0.25dB (For Multimode) | |
Tested by JDS | |
Return Loss (Singlemode) |
UPC ≥ 50dB |
SPC ≥ 55dB | |
APC ≥ 60dB (typ.65dB) | |
Tested by JDS RM3750 | |
Repeatability | ±0.1dB |
Operating temperature | -400C to 850C |
Geometry Requirement ( Singlemode) |
Ferrule Endface Radius |
7mm ≤ R ≤ 12mm (For APC) | |
10mm ≤ R ≤ 25mm (For Standard) | |
Apex Offset ≤ 30 μm (For Master) | |
Apex Offset ≤ 50 μm (For Standard) | |
Undercut -50nm ≤ U ≤ 50nm | |
Tested by DORC | |
Geometry Requirement ( Singlemode) |
Ferrule Endface Radius |
7mm ≤ R ≤ 12mm (For APC) | |
10mm ≤ R ≤ 25mm (For Standard) | |
Apex Offset ≤ 30 μm (For Master) | |
Apex Offset ≤ 50 μm (For Standard) | |
Undercut -50nm ≤ U ≤ 50nm | |
Tested by DORC |
Application
1). Communication rooms
2). FTTH (Fiber to The Home)
3). LAN (Local Area Network)
4). FOS (fiber optic sensor)
5). Fiber Optic Communication System
6). Optical fiber connected and transmitted equipment
7). Defense combat readiness