19 inch rack mounted 24 port fiber optic patch panel black

Product Description

• Made of cold-rolling steel, static spreading-plastic, small dimension and exquisite and easy operation
• The box has a pothook, which is convenient to install and dismantle
• The splice tray could be piled one upon another, flexible to turn; the curve radius of the coiled spear fibers should be guaranteed to be over 37.5mm in the splice tray
• The box is of unique structure, reasonable layout, and has adequate room for operation
• Adjustable clamp seal ring and reinforce configuration, which could adjust different sizes of cables flexibly to make sure the cables are clamp tightly
• The indoor type is of excellent seal performance, which could prevent water from entering effectively
• Can be installed with SC SX/LC DX adapter
• Up to 48 cores splice capacity MAX in 1U patch panel
• Rack Mount and Sliding drawer design both available

Feature:

Made of cold-rolling steel, static spreading-plastic, small dimension and exquisite and easy for operation.

The box has a pothook, which is convenient to install and dismantle.

The splice tray could be piled one upon another, flexible to turn; the curve radius of the coiled spear fibers should be guaranteed to be over 37.5mm in the splice tray.

The box is of unique structure, reasonable layout, and has adequate room for operation.

Adjustable clamp seal ring and reinforce configuration, which could adjust different sizes of cables flexibly to make sure the cables are clamp tightly.

The indoor type is of excellent seal performance, which could prevent water from entering effectively.

Main technical Parameter:

Environmental temperature: -25 - 65°C.

Relative humidity:≤85%((when the temperature is below 30°C)).
Atmosphere pressure:70~106Kpa.
Insulating resistance:≥2×104 MΩ/500VDC.

Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.

The fiber optic splice tray could be piled one upon another, flexible to turn.

The box are Rack Mounted, which is convenient to install and dismantle.

The indoor type is of excellent seal performance, which could prevent water from entering effectively.

Material properties

Fiber Optic Patch panel materials is corrosion resistance, stable physical and chemical properties;

all material must be compatible, and is compatible with optical cable sheath and wiring pigtail sheath.

To prevent corrosion and other electrical damage, these materials must be compatible with the other

equipment used in the patch panel

1. If the patch panel use engineering plastics, its combustion performance shall be in accordance

with A GB/T5169.7 test, the test last for 30s.

2. optical fiber connector enhancement protector use materials and hot melt temperature filler shall

be not less than 120 °C, thermal softening temperature shall be not less than 90 °C, can be used in

a 25 ~+40°C temperature.

3. all materials should be non-toxic, non corrosive, on human health and other equipment element

side effects.

The appearance shall complete shape, no burr, no bubbles, no cracks and voids, warping, impurity

defects. All the background color should be uniformly continuous. Beautiful appearance and

convenient construction, low attenuation loss, reasonable structure, reinforced core is fixed in

the terminal box, the sheath has ground wire, suitable for fiber optic ribbon cable and indoor cable.

Unique design,19 inch rack or wall mount.