MPO Multi Fiber Push On APC Connector 12 Strand Cable Upc Ceramic Ferrule

♦ Product Description

1. High Performance in IL & RL
2. 4,8,12 and 24 fiber connector terminations and assemblies
3. Designed for low loss and standard loss SM and MM applications
4. Economical solution for mass-termination of fiber
5. Suitable for MPO/MTP application
6. Ruggedized round cable, oval cable and bare ribbon options available
7. Color coded housings available to differentiate fiber type, polish type and/or connector grade
8. Meets IEC Standard 61754-7& JIS C5982
9. Structured cabling per TIA-568-C
10. Parallel Optics
* Optical Internetworking Forum (OIF) Compliant
* Infiniband Compliant
11. Infiniband
* 10G Fiber Channel Compliant

* 40G and 100G IEEE 802.3
* QSFP

♦ Introduction

- Space-saving 12 fibers in a single connector
- High density connections between network equipment in telecommunication rooms
- Easy installation and removal with push-pull latching
- Compact design for high fiber-count applications with space limitations
-. With 12-fiber and 24-fiber MPO/MTP connector standard
- Available in OS1/2, OM2, OM3 and OM4
- Available in FC,LC, SC, ST, MU, and MTP/MPO
- Interface polished type has PC, UPC and APC
- Available in 12 / 24 / 36 / 48 / 72 / 96 / 144-fibers
-100% factory tested
- Discrete connectors are heat-cured and use ceramic ferrules and sleeves
- Fan-out fibers from MPO/MTP connectors into individual simplex or duplex
- Customized for length, staggering, connector type, breakout type, fiber count, and labeling fiber

♦ Polarity

Type A - Straight (key-up to key-down): Straight-through polarity is typically for connecting patch panels. They are wired in a mirrored configuration, going from Pin 1 on one connector end to Pin 1 on the opposite end, etc.
Type B - Rollover (key-up to key-up): Rollover polarity is used primarily for connecting to switches and transceivers in 40Gb applications. In a 12-strand rollover polarity, the cable is wired from Pin 1 on one connector end to Pin 12 on the opposite end. Then 2 to 11, and so forth.
Type C - Flipped: Pair-Flipped polarity is the most commonly used polarity type for this cable, and typically used in cassette-to-cassette applications. Pin 1 on one end goes to Pin 2 on the opposite end, and 2 to 1, 3 to 4, 4 to 3, and so on. This is the default polarity option, but you can select your desired polarity from our drop-down menu above.

♦ Specification

♦Packing

Plastic bag & Carton