Overview
LNK-GYM408GXP-SFP (8G + 4SFP) is the next generation L2+ managed POE+ switch from, features with powerful web management function. Fan-less & low consumption design. Supporting Looped Network Redundancy. (Self-healing time <20ms, with complete security and QoS policy, support VLAN division, port mirroring, port speed limit. Support broadcast storm suppression & flow control. Managed through a variety of interfaces and ways including the WEB, CLI and SNMP etc.
With the wide working temperature and anti-surge protection in all ports, it is widely used in rail traffic, electricity, water conservancy, petrochemical, industrial control, electric alarm bayonet and other harsh environment, stability required strictly industry or place.
Features
Application
Whether you want to create a high-performance network to connect all clients’ computers or an application to deliver data, voice, and video services, the IPS36168PFM provides a solution to fit your requirements. Possible implement scenarios include:
The IPS36168PFM switch can easily and securely connect clients’ PC or laptop in offices with each other and with all of the servers, printers, and other networking devices they use. High performance and reliable connectivity will help to speed file transfers and data processing, improves network performance and security, and keeps the clients connected and productive.
The IPS36168PFM switch connected with WiFi APs allow WiFi clients to work from conference rooms and public areas, collaborate in any place, and access networking from wherever they are. Gigabit Ethernet connectivity provides these clients have the suitable bandwidth and quality performance they need to make mobility connected. Through embedded security, the clients can work with confidence and authorized users can access networking and network devices.
To be a managed network solution, it provides the high performance and advanced networking quality to deliver all networking communications and data (such as IP telephony, IP surveillance, and Video Streaming) over a single network.
Technical Indexes
Product Name | 8-Port 10/100/1000Base-T + 4-Port 10G SFP+ L2 Plus Industrial Managed POE Switch |
Product Model | LNK-GYM408GXP-SFP |
Connector Type | 8x 10/100/1000Base-T ports + 4x 10G(1.25/2.5/5G) SFP slots + 1 Console port |
Network Media |
10BASE-T: Cat3/ 4/ 5 UTP (≤100m) 100BASE-TX: Cat5 or more UTP (≤100m) 1000BASE-TX: Cat5 or more UTP (≤100m) |
Switching capacity | Capacity in Millions of Packets per Second (mpps) (64-byte packets) 130.94 |
Bandwidth | 368Gbps |
Layer 2 Switching | |
Spanning Tree Protocol (STP) |
Standard Spanning Tree 802.1d Rapid Spanning Tree (RSTP) 802.1w |
G.8032 ERPS | <50ms ring protection for industrial high reliable application |
Aggregation |
Link Aggregation Control Protocol (LACP) IEEE 802.3ad Up to 8 groups Up to 16 ports per group |
VLAN |
Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs) Port-based VLAN 802.1Q tag-based VLAN |
DHCP Snooping (Layer 2) | Prevent unauthorized configuration and use of IP addresses, while providing support for IP Source Guard and ARP detection |
IGMP v1/v2 snooping | IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1024 multicast groups (source-specific multicasting is not supported) |
Security | |
Secure Shell (SSH) Protocol | SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported |
Secure Sockets Layer (SSL), HTTPS | SSL encrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch |
Port Security | Locks MAC Addresses to ports, and limits the number of learned MAC addresses |
IP Source Guard | Prevents datagram with spoofed addresses from being in the network |
Storm control | Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port |
ACLs | Support for up to 256 entries; Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag |
Quality of Service | |
Hardware | Support 8 hardware queues |
Scheduling | 8 COS queues per port support strict priority and weighted round-robin (WRR) |
Classification | Port based; 802.1p(PCP) VLAN priority based; |
Rate Limiting | Ingress policer;egress shaping and rate control;per VLAN,per port and flow based |
Management (Web/ SSL, Telnet/ SSH, ping, Trivial File Transfer Protocol (TFTP), SNMP, Syslog) | |
Web GUI interface | Built-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and monitoring |
Dual Image | Dual image provides independent primary and secondary OS files for backup while upgrading |
Firmware upgrade | Web browser upgrade (HTTP/ HTTPs) and TFTP;Upgrade through console port as well |
Port mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported. |
Other management | Single IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable diagnostics; ping; syslog; Telnet client (SSH secure support) |
Green Ethernet | |
Link detection |
Compliant IEEE802.3az Energy Efficient Ethernet Task Force. Automatically turns off power on Gigabit Ethernet RJ-45 port when detecting link down or Idle of client. Active mode is resumed without loss of any packets when the switch detects the link up |
Cable length detection | Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter. |
Jumbo frames | Frame sizes up to 9KB supported on Gigabit interfaces |
MAC Table | Up to 16K MAC addresses. |
Link Layer Discovery Protocol (LLDP) | Used by network devices for advertising their identities, capabilities, and neighbors on a IEEE 802 local area network, principally wired Ethernet. |
PoE | |
PoE Standard: | PoE Port Power:30W per PoE port by default, can be customized by Web management software |
PoE Ports: | PoE Ports: End-span (Mid-span optional) |
Minimum Requirements |
Web browser: Mozilla Firefox version 2.5 or later, Microsoft Internet Explorer version 6 or later; Category 5 Ethernet network cable; TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in network |
Dimensions | 165*148*54mm |
Working Environment | Operating temperature: -40 to 75 ℃; Storage temperature: -40℃ to 75 ℃; Operating humidity: 10% to 90% , relative, non-condensing |
Warranty | 5 years warranty |
Ordering Information
Model | Description |
LNK-GYM408GXP-SFP | L2+ 8-Port 10/100/1000T 802.3at PoE + 1-Port 10/100/1000T Console + 4-Port 10G(support 1.25/2.5/5G) SFP Managed Switch |
SFP Options | ► SFP option. Please select your SFP on our SFP Options Page (Industrial SFP). |
► SFP module is to be purchased separately. | |
Mounting Options | ► Default DIN-Rail Bracket installed, Wall Mount Bracket is included. |
Power Options | ► 240W/5A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block. |
► Power Supply is to be purchased separately. |