Overview
The LNK-EOC1160P receiver works with the transmitter of 1 port Ethernet Extender over Coax with PoC (LNK-EOC110P-T) to provide Ethernet Extension of 8/16 channel 10/100Base-TX over Coaxial cable to 4-port 10/100/1000Mbps Ethernet. The maximum transmission distance is 800m. The product support PoC, hence, no power point is required at the camera side for the transmitter (LNK-EOC110P-T) and its connected IP camera if the camera obtain power from the transmitter via Power over Ethernet (PoE). The Ethernet data received by anyone of the coax data port (1-8/16) at the receiver is transferred to all four Ethernet ports (P1-P4). The product is good for retrofit of analogue system by using the existing coaxial cable infrastructure.
Features
Technical Indexes
Ethernet | |
Standards | IEEE802.3 10Base-T |
IEEE802.3u 100Base-TX | |
IEEE802.3ab 1000Base-T | |
Cabling | 100Base-TX: Cat5 or above |
Maximum Distance | Cat5UTP up to 100m |
Connector | 4 x RJ45 |
Coaxial | |
Cabling | Coaxial Cable (75 ohm) |
Connector | 16 BNC (female) |
Distance | 800m |
Data Rate per port | 40Mbps Max. (Downlink) |
10Mbps Max. (Uplink) | |
Technology | Power Line Communication (PLC) |
Protection | |
Reverse Polarity | Present |
Overload Protection | Present |
Electrical and Mechanical | |
Input Power | 100-240VAC, 50/60Hz |
Power Consumption | 32W Max. w/o PoC |
1000W Max. w/PoC | |
Dimensions (W x D x H) | 483 × 300 × 44 mm |
Weight | 4.5 Kg |
Casing | Aluminum case |
Environmental | |
Operation Temperature | -10°C to 60°C (14℉ to 140℉) |
Storage Temperature | -40°C to 85°C (-40℉ to 185℉) |
Relative Humidity | 5% to 90% non-condensing |
MTBF | > 100,000 hrs |
Regulatory Approvals | ISO9001 FCC Part 15 Class A EN55022 Class A Surge Protection RJ45: 1KV BNC: 2KV Power: 500V |
Application