Model: LNK-103OAM-20
Overview
10/100M, 10/100/1000M IEEE802.3ah OAM manageable Ethernet Fiber Media Converter can supervise the real time situation of remote manageable fiber media converter and set the functions. With this system, the response speed of the operator is quickened, the daily maintenance and network expenditure of the operators are reduced, and the serving quality of them is enhanced.
Features
Technical Indexes
Standards &Protocols | IEEE802.3x full duplex on 10BaseT, 100BaseTX,1000BaseT IEEE802.3-2002 |
IEEE802.3u 100BaseTX IEEE802.3ab 1000BaseT IEEE802.3z 1000BaseX IEEE802.3ah-2004 | |
IEEE 802.1d Spanning Tree | |
IEEE 802.1w | |
IEEE 802.1p Qos | |
IEEE 802.1q VALN TAG IEEE802.3X Flow control | |
Connector | ST, SC, FC, LC |
Operating wavelength | 850nm, 1310nm at Multi-mode; 1310nm, 1550nm at single mode |
Optical fibers | Multi-mode: 50/125,62.5/125,100/140um; Single-mode: 8.3/125,8.7/125,9/125,10/125um |
Management port | 1 console (RJ45) |
Serial port configuration | 9600bps/8bit/none parity/1 stop bit/none low control |
User port | 10/100BaseTX 10/100/1000BaseTX (RJ45), Full/Half duplex; |
100Base-FX 1000Base-FX(SFP module) | |
Fiber link option | Dual fiber/single fiber (WDM) |
Max frame size | 1518 Bytes (100M);9728 Bytes (1000M) |
Transmission distance | Dual fiber: up to 100km |
Single fiber: up to 80km | |
Band width management | Support bandwidth control by step of64Kbps (N*64K) |
LLCF | Support Link loss carry forward (LLCF) |
Q-in-Q | Q-in-Qfunctionality(addanotherouter9100tag)makes the customer packets tunneled and unmodified through the providers network by using a provider configured 802.1QVLANtags,alleviating the burden of aggregation switch |
IEEE802.3ah OAM standard function | LNK-102OAM/LNK-103OAM Series series has two working modes: Master and Slave. Central Office device works at Master mode, and Customer Premise device at Slave mode. The OAM functions are originated by Master device. |
Link monitoring | Report local events to remote device, including Critical Event (voltage and temperature abnormal) and Dying Gasp (power down). |
OAM discovery | Check if remote device has implemented/enabled IEEE802.3ah OAM function, and negotiate with remote device |
Working Temperature | 0℃~60℃ |
Working Humidity | 5%~90%(non-condensing) |
Storage Temperature | -10℃~70℃ |
Storage Humidity | RH: 5~90% non-condensing |
Power supply | 85VAC~265VAC or -40VDC~-57VDC |
Power consumption | ≤5W |