Specifications
Brand Name :
E-link China
Model Number :
LNK-SFP-10G-LR
Certification :
CE, RoHS, FCC
Place of Origin :
Shenzhen, China
MOQ :
1 piece
Payment Terms :
T/T, Western Union, MoneyGram, Paypal
Supply Ability :
1000000000pcs/Month
Delivery Time :
3-5 working days
Packaging Details :
1 piece in 1 carton box
Bit Rates :
1.25 Gb/ to 10.3 Gb/s
Optical interface :
compliant to IEEE 802.3ae
Electrical interface :
SFF-8431
Hot Pluggable :
Support
Distance :
10km
Warranty :
2 years
Price :
Negotiation
Description

10G SFP + 1310nm 10km LC Single Mode SFP Optical Transceiver Module

Features

  • Supports rate from 1.25 Gb/ to 10.3 Gb/s bit rates
  • Optical interface compliant to IEEE 802.3ae
  • Electrical interface compliant to SFF-8431
  • Hot Pluggable
  • 1310nm DFB transmitter, PIN photo-detector
  • Operating case temperature: 0 to 70 °C
  • Low power consumption
  • Applicable for 10km SMF connection
  • All-metal housing for superior EMI performance
  • Advanced firmware allow customer system encryption information to be stored in transceiver
  • Cost effective SFP+ solution, enables higher port densities and greater bandwidth
  • RoHS6 compliant (lead free)

Applications

  • 10GBASE-LR at 10.3125Gbps
  • Other optical links

Product description

This 1310 nm DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km.

The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

Absolute maximum rating

These values represent the damage threshold of the module. Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters Symbol Min. Max. Unit
Power Supply Voltage VCC 0 +3.6 V
Storage Temperature Tc -40 +85 °C
Operating Case Temperature Tc 0 +70 °C
Relative Humidity RH 5 95 %
RX Input Average Power Pmax - 0 dBm

Recommended operating environment

Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter Symbol Min. Typical Max Unit
Power Supply Voltage VCC 3.135 3.300 3.465 V
Operating Case Temperature TC 0 25 70 °C

Low Speed Characteristics

Parameter Symbol Min. Typical Max Unit
Power Consumption 1 W
TX_Fault,RX_LOS VOL 0 0.4 V
VOH Host_Vcc-0.5 Host_Vcc+0.3 V
TX_DIS VIL -0.3 0.8 V
VIH 2.0 VCCT+0.3 V
RS0,RS1 VIL -0.3 0.8 V
VIH 2.0 VCCT+0.3 V

Optical characteristics

The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

Unit Values
Operating Reach m 10K
Transmit
Center wavelength (range) nm 1260 -1355
Side Mode Suppression Ratio (min) dB 30
Launched power
– maximum dBm +0.5
– minimum dBm -8.2 Notes1
  • OMA
dBm -5.2
  • OMA-TDP (min)
dBm -6.2
Transmitter and dispersion penalty dB 0 Notes4
Average launch power of OFF transmitter (max) dBm -30
Extinction ratio (min) dB 3.5 Notes2
RIN12 OMA (max) dB/Hz -128
Optical Return Loss Tolerance (min) dB 12
Receiver
Center wavelength (range) nm 1260-1355
Receive overload (max) in average power1 dBm 0.5
Receive sensitivity (min) in average power1 dBm -14.4 Notes3
Receiver sensitivity (max) in OMA (footnote 2) dBm -12.6 Notes3
Receiver Reflectance (max) dB -12
Stressed receiver sensitivity (max) in OMA2 dBm -10.3
Vertical eye closure penalty (min)3 dB 2.2
Stressed eye jitter (min)2 UIp-p 0.7
Receive electrical 3dB upper cutoff frequency (max) GHz 12.3
Receiver power (damage, Max) dBm 1.5

Notes:

  1. The optical power is launched into SMF
  2. Measured with a PRBS 231-1 test pattern@10.3125Gbps
  3. Measured with a PRBS 231-1 test pattern@10.3125Gbps BER≤10-12

4. In G.652 and G.655(NDSF)

Electrical characteristics

The following electrical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

Parameter Symbol Min. Typical Max Unit Notes
Data Rate 1.250 10.3125 - Gbps
Power Consumption - 1000 mW
Transmitter
Single Ended Output Voltage Tolerance -0.3 - 4.0 V
C common mode voltage tolerance 15 - - mV
Tx Input Diff Voltage VI 400 1600 mV
Tx Fault VoL -0.3 0.4 V At 0.7mA
Data Dependent Input Jitter DDJ 0.10 UI
Data Input Total Jitter TJ 0.28 UI
Receiver
Single Ended Output Voltage Tolerance -0.3 - 4.0 V
Rx Output Diff Voltage Vo 300 850 mV
Rx Output Rise and Fall Time Tr/Tf 30 ps 20% to 80%
Total Jitter TJ 0.70 UI
Deterministic Jitter DJ 0.42 UI

Send your message to this supplier
Send Now

LC Optical Interface 1000base Lx / T SFP Transceiver Module Low Power Consumption

Ask Latest Price
Brand Name :
E-link China
Model Number :
LNK-SFP-10G-LR
Certification :
CE, RoHS, FCC
Place of Origin :
Shenzhen, China
MOQ :
1 piece
Payment Terms :
T/T, Western Union, MoneyGram, Paypal
Contact Supplier
LC Optical Interface 1000base Lx / T SFP Transceiver Module Low Power Consumption

E-link China Technology Co., Ltd.

Verified Supplier
9 Years
guangdong, shenzhen
Since 2001
Business Type :
Manufacturer
Total Annual :
10000000-20000000
Employee Number :
100~150
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement