MachineU > China Products > Lights & Lighting > Professional Lighting > LED Fiber Optic Lights
1270 - 1450nm SFP+ ER Optical Transceiver Modules For Cisco Switches Duplex LC Connector
1270 - 1450nm SFP+ ER Optical Transceiver Modules For Cisco Switches Duplex LC Connector
Specifications
Brand Name :
E-link China
Model Number :
LNK-CSFP-10Gxx-40
Certification :
CE, RoHS, FCC
Place of Origin :
Shenzhen, China
MOQ :
1 piece
Payment Terms :
T/T, Western Union, MoneyGram, Paypal
Supply Ability :
1000000000pcs/Month
Delivery Time :
3-5 working days
Packaging Details :
1 piece in 1 carton box
Data Rate :
10Gb/s
CWDM :
Support
Wavelength :
1270~1450nm
Distance :
40km
Connector :
Duplex LC connector
SFF 8472 and IEE802.3ae :
Compliant
Price :
Negotiation
Description

10Gb/s CWDM 1270~1450nm 40km SFP+ ER Optical Transceiver Module

Features:

  • Support multi protocol from 9.95Gb/s to 11.3Gb/s
  • Hot pluggable SFP+ footprint
  • Compliant with SFF 8472 and IEE802.3ae
  • Transmission distance of 40km over single mode

  • fiber
  • 1270～1450nm CWDM DFB transmitter
  • PIN Receiver
  • Duplex LC connector
  • 2-wire interface for management and diagnostic monitor
  • Single Power 3.3V supply voltages
  • Temperature range -5°C to 70°C
  • Power dissipation: <1.5W
  • RoHS Compliant Part

Applications:

  • 10GBASE-ER/EW Ethernet
  • 40km 10G Fiber channel
  • SONET OC-192/SDH
  • CWDM Networks

Description:

E-link’ LNK-10G SFP+ ER Small Form Factor 10Gb/s (SFP+) transceivers are compliant with the current SFP+ Multi-Source Agreement (MSA) Specification. The high performance cooled 1270～1450nm CWDM DFB transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications up to 40km optical links.

The SFP+ Module compliants with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.

Specification:

  • Absolute Maximum Ratings
Parameter Symbol Min. Typical Max. Unit
Storage Temperature TS -40 +85 °C
Case Operating Temperature TA 0 70 °C
Maximum Supply Voltage Vcc -0.5 4 V
Relative Humidity RH 0 85 %

  • Electrical Characteristics (TOP = 0 to 70 °C, VCC = 3.135 to 3.465 Volts)
Parameter Symbol Min. Typical Max. Unit Note
Supply Voltage Vcc 3.135 3.465 V
Supply Current Icc 380 mA
Power Consumption P 1.5 W
Transmitter Section:
Input differential impedance Rin 100 Ω 1
Tx Input Single Ended DC Voltage Tolerance (Ref VeeT) V -0.3 4 V
Differential input voltage swing Vin,pp 180 700 mV 2
Transmit Disable Voltage VD 2 Vcc V 3
Transmit Enable Voltage VEN Vee Vee+0.8 V
Receiver Section:
Single Ended Output Voltage Tolerance V -0.3 4 V
Rx Output Diff Voltage Vo 300 850 mV
Rx Output Rise and Fall Time Tr/Tf 30 ps 4
LOS Fault VLOS fault 2 VccHOST V 5
LOS Normal VLOS norm Vee Vee+0.8 V 5

Note:

  1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
  2. Per SFF-8431 Rev 3.0
  3. Into 100 ohms differential termination.
  4. 20%～80%
  5. LOS is an open collector output. Should be pulled up with 4.7k – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.

  • Optical Characteristics (TOP = 0 to 70°C, VCC = 3.135 to 3.465 Volts)
Parameter Symbol Min. Typical Max. Unit Note
Transmitter Section:
Center Wavelength λc λ-6.5 λ+6.5 nm
spectral width △λ 1 nm
Average Optical Power Pavg +0 +5 dBm 1
Laser Off Power Poff -30 dBm
Extinction Ratio ER 3.5 dB
Transmitter Dispersion Penalty TDP 3.2 dB 2
Relative Intensity Noise Rin -128 dB/Hz 3
Optical Return Loss Tolerance 20 dB
Receiver Section:
Center Wavelength λr 1260 1460 nm
Receiver Sensitivity Sen -16 dBm 4
Stressed Sensitivity (OMA) SenST -13 dBm 4
Los Assert LOSA -30 - dBm
Los De-assert LOSD -17 dBm
Los Hysteresis LOSH 0.5 dB
Overload Sat 0 dBm 5
Receiver Reflectance Rrx -12 dB

Note:

  1. Average power figures are informative only, per IEEE802.3ae.
  2. TWDP figure requires the host board to be SFF-8431compliant. TWDP is calculated using the Matlab code provided in clause 68.6.6.2 of IEEE802.3ae.
  3. 12dB reflection.
  4. Conditions of stressed receiver tests per IEEE802.3ae. CSRS testing requires the host board to be SFF-8431 compliant.
  5. Receiver overload specified in OMA and under the worst comprehensive stressed condition.

Product tags

ge sfp lc connector sx transceiver

,

sfp cwdm optical transceiver

,

buy cwdm sfp transceiver
Send your message to this supplier
Send Now

1270 - 1450nm SFP+ ER Optical Transceiver Modules For Cisco Switches Duplex LC Connector

Ask Latest Price
Product Detail
Brand Name :
E-link China
Model Number :
LNK-CSFP-10Gxx-40
Certification :
CE, RoHS, FCC
Place of Origin :
Shenzhen, China
MOQ :
1 piece
Payment Terms :
T/T, Western Union, MoneyGram, Paypal
Contact Supplier
1270 - 1450nm SFP+ ER Optical Transceiver Modules For Cisco Switches Duplex LC Connector

E-link China Technology Co., Ltd.

Verified Supplier
9 Years
guangdong, shenzhen
Since 2001
Business Type :
Manufacturer
Main Products :
Fiber Ethernet Media Converter, Industrial Ethernet Media Converter, POE Fiber Media Converter
Total Annual :
10000000-20000000
Employee Number :
100~150
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products SFP Optical Transceiver Module
MachineU China Products Lights & Lighting Professional Lighting LED Fiber Optic Lights
Contact Supplier
Submit Requirement