Overview
E-link LNK-MV series video multiplexer bound the 2~6-ch video signal of the camera and the control signal of rs485 reverse controller in one coaxial cables transmission.
The Video Multiplexer is composed of a Transmitter and a Receiver. From the receiver to the transmitter, it transmits 2~6 channel video signals through one coaxial cable to long distance.
Besides, as you don’t need to install extra cable for data signals, you can save your money and time.
Features
· 2-6Channel video signal for camera over 1 coaxial cable
· Designed according to projects with minimum installation volume requirement
· Long distance transmission up to 500m
· Frequency Division Multiplexing, with all video and data transmission real-time and all images high-definition and non-delay.
· Non-debug, adaptive: as long as the transmission distance range, the device will automatically
adjust their targets,
· One coaxial cable, no extra cable, which save infrastructure cost,(cost saving 25~30%)
· Maintaining high quality video & anti-interference immunity
· Easy installation with BNC harness
Technical Indexes
Transmitter | ||||||
VIDEO 1 | VIDEO 2 | VIDEO 3 | VIDEO 4 | VIDEO 5 | VIDEO 6 | |
Central Frequency | 46MHZ | 38MHZ | 30MHZ | 30MHZ | 30MHZ | |
Signal Output Intensity | 105db | 105db | 103db | 102db | 102db | 102db |
Video Input Impedance | 75 Ohm (Unbalanced) | |||||
Video Input Amplitude | 0.8-1.5VPP | |||||
Video Compatible Format | PAL, NTSC | |||||
Video Interface | BNC | |||||
2-62-2- | 8MHZ | |||||
Power Supply | DC12V/1A | |||||
Receiver | ||||||
Signal Output Amplitude | 0.9-1.1VPP | |||||
Output Polarity | Positive | |||||
Output Impedance | 75(Unbalanced) | |||||
Video Interface | BNC | |||||
Power Supply | DC12V/1A | |||||
RS485 Output Parameter(Switch with VIDEO 1) | ||||||
Quantity of Node Supported | 10 | |||||
Baud Rate | 300-57600bps | |||||
Interface | Double terminal block | |||||
Dimension | 158*124*39mm |
Ordering Information
LNK-MV201 | 2-Ch video converter transmitter and receiver for camera by one coaxial cable |
LNK-MV301 | 3-Ch video converter transmitter and receiver for camera by one coaxial cable |
LNK-MV401 | 4-Ch video converter transmitter and receiver for camera by one coaxial cable |
LNK-MV501 | 5-Ch video converter transmitter and receiver for camera by one coaxial cable |
LNK-MV601 | 6-Ch video converter transmitter and receiver for camera by one coaxial cable |
Application