Power Over Ethernet Splitter Industrial 10 100 1000Mbps 30W 802.3at 12VDC Output
PoE Splitter 12V Advantages
► “PoE (Power + Data)” Input Port 1 x RJ-45 10/100/1000Base-T
► “Data” Out Port 1 x RJ-45 10/100/1000Base-T
► DC Out Plug Connector: 1 removable 2-Pin terminal block
► Vary on device’s power requirement; cannot be over 20 watts
Technical Indexes
Processing Type: | Forward |
Half-duplex, Full-duplex | |
Cabling: | 1000Base-T: Cat5 or above |
Maximum Distance: | Cat5 UTP up to 100m |
Power over Ethernet | |
PoE Standard: | IEEE 802.3af/at Power over Ethernet |
Number of devices that can be powered: | 1 (DC12V) |
Environmental | |
Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
Relative Humidity: | 5% to 95% non-condensing |
MTBF: | >200,000hrs |
Electrical and Mechanical | |
Power Output: | 20W 12VDC (Terminal Block) |
Power Consumption: | 25W Max. |
LED Indicators: | |
PWR: | 12VDC Power OUT |
POE: | PoE Power IN |
Dimensions (WxDxH): | 95 x 70 x 30 mm |
Weight: | 0.25Kg |
Casing: | Aluminum Case |
Mounting Options: | DIN-Rail / Wall-mount |
Overview
LNK-INS301-12V series is an Industrial Grade, Gigabit Ethernet, PoE Splitter, designed to deliver data, via RJ-45 Ethernet connector, and electrical power, via screw terminal block, to non-PoE devices. This device saves the high cost of running separate electrical service to edge devices and acts as PD equipment and can be powered by standard PoE IEEE802.3af/at PSE (Power Source Equipment) switches or work when paired with LNK-INJ301 PoE Injectors.
Ordering Information
Model | Description |
LNK-INS301-19V | Industrial IEEE802.3at Gigabit PoE Splitter Output Voltage 12VDC, maximum output of 20W at 12VDC, Support DIN-Rail mounting and Wall mounting installation, -40 to 80°C operating temperature |
Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is included. |