Portable Laser Cleaning Machine 50W Handheld Paint Rust Removing Machine

Introduction

Keyi LASER is the leading provider of laser cleaning solution in China. Supplying 50watts to 1000 watts laser power for a wide-range of applications. It is easy to install, operate, easy to achieving automation. Plug in power, turn on and start cleaning-without chemicals, media, dust, water. Cleaning with no detergent, no media, no dust, no water. Auto focus, can clean curved surface, gentle cleaning surface. Cleaning resin, oil stain, rust, coating materials, paints on workpiece surface.

Application

Keyi LASER provides surface preparation technology that’s both efficient and remarkably versatile for a growing list of industrial applications. Whether the surface is metallic, plastic, ceramics, glass, stone or concrete, the results speak for themselves.

Technical Parameters

Laser Derusting Machine More Applicable Industries

1) Laser cleaning in mould industry

Traditional cleaning for moulds includes: sandblast,ultrasonic and CO2. Super hot moulds must be cleaned after hours of cooling,which takes so much time.

This will damage the accuracy of moulds,chemical solvent and noises will also cause problems for safety and environment.

Laser beam can be transferred through optical fiber,so it can clean the dead angles and other places that is difficult to clean;

For rubber moulds, laser beam will not gasify it so that there will not be harmful gas.Laser is already applied in tyre mould industry in Euramerican countries.

The anti-sticking films in food moulds need periodic replacement.Laser cleaning is also more suitable than chemical reagent.

2) Laser cleaning in Weapons

Laser cleaning can remove rust and contaminant in weapons with high speed and high efficiency. The cleanliness is much higher than chemical cleaning and with no damage to body surface.And a compact oxide coating and molten metal layer can be formed on body surface, which can improve surface strength and corrosion resistance.

3) Laser cleaning in removing old paint in airplanes

Airplanes need to repaint after certain time, but old paint must be completely removed before repainting.Traditional mechanical cleaning will damage metal

surface of airplanes,which will bring hidden danger to safe flight.Laser cleaning will not damage the surface.

4) Laser cleaning in building outer wall

As there are more and more buildings nowadays, the demands for outer wall cleaning is becoming huge.Laser cleaning offers a more effective solution for any contaminants on stones, metals and glass in outer walls than traditional cleaning.

5) Laser cleaning in electronics industry

Laser is also applied in electronics industry to remove oxide accurately: Before circuit board welding,the oxide on electronics component pins must be

completely removed to ensure best conductivity,without damaging the pins.Laser cleaning can do this and can clean one pin for one laser pulse.

6) Degrease in precision engineering industry

Usually we remove esters and mineral oil through chemical process in precision engineering industry,but there will be chemical residue.

Laser beams can completely remove esters and mineral oil without damaging spare parts’ surface.Because this process is done by the blast wave but not mechanical effect.

This is very suitable for cleaning machine parts in aerospace industry and other precision parts processing.

7) Pipeline laser cleaning in nuclear reactor

High power laser beams through optical fiber can directly remove radioactive dust to ensure the safety of the staff.