100 Watts Laser Cleaning Machine Automatic Cleaning Rust And Dust
Machine introduction:
Laser cleaning can be used not only to clean organic contaminants, but also to clean inorganic materials, including metal rust, metal particles, dust, etc. It has been widely used in the tire molds cleaning, food molds cleaning, weapons and equipment cleaning, building exterior walls cleaning, cultural relics protection, circuit board cleaning, ester cleaning in precision parts processing, old paint removal from aircraft, and semiconductor crystal cleaning.
Working Principle:
1. High speed and concentrated pulse(1/10000 second) to shock and vaporize the residue on the surface with great power.
2. Laser pulse is suitable for the removal of organic materials, such as dirt that remains in the tire mold.
3. Short-term impact does not warm the metal surface and no damage to the substrate.
Main features:
1. Non-contact cleaning, no damage to workpiece
2. Precision positioning, selective cleaning, desired cleaning area can be applied to the workpiece
3. No need chemical detergent, no consumable. Safe & environment-friendly.
4. Easy to operate ,Either portable or equipped with robot for automatic cleaning.
5. High cleaning efficiency, time-saving.
6. Stable laser cleaning system, free maintenance.
Application:
· Metal surface derusting
· Surface paint removal paint treatment
· Surface without dirt, stains, dirt cleaning
· Surface coating, coating removal
· Oxide surface,Oil stain and contaminant cleaning
· Welding surface / spray surface per-treatment
· Stone figure surface dust & attachment cleaning.
· Rubber/plastic/metal mold residue cleaning
Parameters:
Model | HB-HC100 |
Laser Generator | MAXPHOTONICS |
Laser Power | 100W |
Machine Weight | 180KG |
Laser Gun Weight | 1.8KG |
Power Consumption | 2000W |
Cooling System | Forced-air cooling |
Working Mode | Manual or auto |
Machine Life Span | 50000 hours |
Cable length | 3 Mtrs (can be lengthened) |
Working Distance | 150mm / 2500mm / 500mm |
Laser Wavelength | 1064 um |
Power Supply | 220v / 50hz / 2A or 380v / 50HZ / 2A |
Work Temperature | 5℃ - 45 ℃ |
Work Humidity | < 90% |
Laser Class | IV |
Samples: