UT-King Fiber Optic fast Connector field-installable connectors are factory pre-polished connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibers.
UT-King's fast Connector connectors are compatible with 250 µm and 900 µm optical fibers, as well as 900 µm, 2 mm and 3 mm cordage. All primary fiber types are supported, and each connector is color coded per industry-standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination. Incorporated into this device is an innovative, translucent wedge enabling the use of a common VFI to provide a “pass/fail” signal once physical contact is achieved.
Applications
er Optic Cable | 2.0mmx3.0mm |
Plug Type | SC/PC |
Fiber diameter | 0.125mm |
Fiber Mode | Singlemode |
Insertion Loss | <0.5dB (typical 0.2dB) |
Return Loss | <50dB |
Tensile strength | <20N |
Temperature | -40℃—+70℃ |
Temperature cycling | IL<0.3dB,RL<5dB |