How to install and use fiber optic quick connectors?
Step one: remove the connector tail cover and pass the cable through it; Step two: Use a fiber stripper to strip the cable sheath, the length is about 5CM; Step three: Cut the exposed coating layer by placing the Miller forceps close to the edge of the fixture to expose the optical fiber; Step four: wipe and clean the bare fiber with a dust cloth; Step five: Use a clamp to cut the fiber; Step six: Align the fiber with the hole in the main body and insert it. When the fiber is initially bent, press the crimp cover down; Step Seven: Screw the tail cover stringed on the cable back to the connector body and fasten the case.