16 cores plastic Fiber Optic Distribution Box with Lock

1. Overview

1.1 This distribution box terminates up to 2 fiber optic cables, offers spaces for splitters and up to 16 fusions, allocates 16 SC adapters and working under outdoor environments. It is a perfect cost-effective solution-provider in the FTTx networks.

2. Specifications

3.1 Structure Features

3.1.1. Splice and patch cord use Separation structure, easy to Capacity expansion and maintenance；

3.1.2. High quality plastic ,Beautiful appearance；

3.1.3. Internal turnover structure,easy to maintenance；

3.1.4. Can install 16 pcs of SC adapters；

3.1.5. Can install tube type splitter；

3.1.6. Could exit 16 pcs of drop cable；

3.1.7. Protection levels:IP55

3.2 Technical Parameter

3.2.1. Connector attenuation(insert,interchange,repeat)≤0.3dB.

3.2.2.Return loss:APC≥60dB,UP≥50dB,PC≥40dB.

3.2.3. High - voltage protection grounding device.

3.2.4. Insulation resistance :≥1000MΩ/500V(DC).

3.2.5.Withstand voltage :≥3000V(DC)/1min.

3.3 Main mechanical parameters

During maintenance ,clear marking of the optical path could avoid confusion effectively . Connector plug durability ＞1000 times.

3.4 Working Environment

Working temperature: -40℃～＋60℃；

Store temperature : －25℃～＋55℃

Relative humidity:≤85%(＋30℃)

Atmospheric pressure: 70～106kPa

4. Installation instructions

4.1 Installation preparation

Checking the product :As per the packing list to check it one by one. Documents Tools

4.2 Fiber-optical stripping and fix.

As per the requirement,open the hole-at the bottom of the box,then install the seal rings As per the cable size to cut seal rings, cable through the it

Adjust the length of cable, keep extra cable around 0.5m；

Clean the cable, cut the cable protector around 0.4m,keep armoured part around 30mm,keep the fiber around 60mm；

When strip the cable ,use insulating tape or heat shrink protector；

Put the fiber through the hole,fix it with clamp, then tighten the screws.

4.3 Trunk optical cable splice and route with pigtail

Strip the fiber and pigtail, 1.3m to 1.5m, then put the tube protector； Open the tray, splice the fiber；

Put the finished fiber into the tray ； Fixed the fiber and pigtail； Remark the fiber and record it