FTTH home use ONU ONT same to HUAWEI ZTE specification XPON Hybrid GPON GEPON works adaptive
Description:
OFSX622-CVW XPON(GPON and EPON dual mode) ONU. It is designed for meeting the triple-play service needs of fixed network operators or cable operators, and widely used in FTTx, video surveillance and other requirements. It is based on mature GPON and EPON technology, and has high ratio of performance to price, stable, cost-effective, high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees. It is fully compliant with GPON and EPON technical regulations such as ITU-T G.984.x, IEEE802.3ah requirement. it can be used as GPON or EPON.
Basic Characteristics
Tech parameters | description |
| 1 XPON interface,SC single mode single fiber RX 2.488 Gbits/s rate and TX 1.244 Gbits/s(GPON), RX 1.244 Gbits/s rate and TX 1.244 Gbits/s(EPON) rate Fiber type:SC/UPC |
Wavelength(nm) | TX 1310nm,RX 1490nm |
Fiber connector | SC/UPC connector |
Down-link data interface | 1*10/100Mbps and 1*10/100/1000M auto-negotiation Ethernet interface, RJ45 interface |
Indicator LED | 8 pcs |
DC supply interface | input+12V 1A |
Power | ≤8W |
Operating temperature | -5~+55℃ |
Humidity | 10~85%(non-condensation) |
Storage temperature | -30~+70℃ |
Dimension(MM) | 167*119*32mm(mainframe) |
Weight | 0.6Kg(mainframe) |
WIFI characteristics
Tech features | description |
antenna | 2T2R Mode |
rate | 300Mbps PHY rate |
encryption methods | WFA,WPA,WPA2,WAPI |
VOIP Technical feature
Tech features | description |
Voltage and Current Monitoring | The XPON ONU continuously monitors the TIP, RING, and battery voltages and currents via an on-chip Monitor ADC |
Power Monitoring and Power Fault Detection | The XPON ONU monitoring functions are used to continuously protect against excessive power |
Thermal Overload Shutdown | If the die temperature exceeds the maximum junction temperature threshold, the device will shut itself down |
CATV Technical features
Tech features | description |
Optical wavelength | 1540~1560nm |
Optical input range | 0~-15 DBm |
Optical return loss | ≥45 DB |
Bandwidth | 45~1000 MHz |
Flatness | 士 1 DB |
RF output level | ≥72 dBuv |
AGC control range | 0~-14 DBm |
RF Output return loss | ≥14 DB |
Output impedance | 75Ω |
CNR | ≥50 DB |
CTB | ≥60 DB |
CSO | ≥60 DB |
Definition of indicator LED
symbol | color | meaning |
PWR | green | ON:successfully connect with power OFF:fail to connect with power |
PON | green | ON:ONU port Link link correctly Flicker: PON registering |
LAN | green | ON: Link up correctly Flicker: data is transmitting OFF: link down faulty |
POTS | green | ON: Register success |
WIFI | green | ON: WIFI is running OFF:WIFI startup fail |
LOS | red | Flicker: fail to connect with PON port |
CATV | Green | Input optical power:0~ -15DBm |
Red | Input optical power:≥0DBm,or -15DBm≥ | |
WAN | Green | ON: link to Internet success OFF: link to Internet fail |
Features:
Solutions:
Contact:
We OPTFOCUS are sincere hope to establish business relationship with you and help you for the market, you are welcome to contact us !